How to use an ax

There is an ax in every home, because it is used for cutting down trees, chopping firewood and other household needs. Wherein design its extremely simple. It consists of a metal attachment with a sharp edge, which is mounted on a strong wooden handle. If necessary, the shaft can be changed.

How to chop with an ax correctly?

The tool is considered an indispensable attribute of the household, especially in rural areas. In addition to rough processing of wood, there is often a need to cut down trees, bushes and other plantings that interfere with agriculture.

The cutting process is not complicated, the main thing is to know some features and carefully follow safety precautions when working with the tool.

How to cut down a tree?

If the planting is high, it is recommended to first remove large branches and twigs to make it easier to work. A strong rope is tied to the top, tilting the trunk in the direction where the tree should fall.

Then they make a cut with an ax at the bottom of the trunk - on the side where it will fall. On the opposite side of the trunk, an undercut is made using a saw. If you plan to uproot a tree, you will need to dig around the root system with a shovel and then chop them off with a sharp ax.

How to cut logs?

First of all, the wooden stick is placed on a strong surface. For example, on a log or a thick log.Then they make a transverse notch with an ax several times, following the markings.

You will have to alternate transverse straight strikes with oblique strikes, at an angle of approximately 45 degrees. During operation, the log is rotated around its own axis. Gradually the ax goes deeper towards the middle and cuts it into two parts.

Safety precautions

Before starting work, check blade sharpness, and also make sure that the metal tip is firmly seated on the handle of the tool. Only in this case can you safely operate the device.

When chopping wood, do not try to act with one blow: it is so easy to damage the ax itself and get a kickback in the muscles. Work carefully, using force only at the end of the swing - when it comes into contact with the log.

After chopping wood, do not place the tool in the grass: the iron will quickly rust. It is better to lean it against the log or leave it inside one of the logs. In the cold season, iron becomes brittle - it is better to immediately put it in the shed.