What is the standard installation height for a bathtub?

Comfort and safety of using the bathroom are ensured by current regulations. Equipment installation is carried out taking into account strict regulations. Read about what height to place the bathtub and how to adjust it correctly in our material.

Standards and permissible deviations. SNiP requirements

The main conditions that must be met are the convenience of water procedures and ease of operation.
Important, so that a person can easily fit into the tank, easily bathe children in it, and can use it for other household purposes. Changes up or down are allowed if the established standard creates discomfort for any family member.

Reference! The main parameter consists of the depth of the bowl (average value 500 mm) and the size of the supports used in the assembly. The shape of the structure does not affect it.

The Construction Regulations (SNiP) provide for the following points:

  • the distance from the floor surface to the sides is 600 mm (including the legs), industrial plumbing fixtures are produced according to this condition, which will allow you to freely fit in and out of the font;
  • a distance of 150 mm is maintained between the floor covering and the bottom of the product, this is necessary to connect the siphon (it is not added to the previous figure, but is included in it);
  • if there is a gap from the wall to the font, it cannot be less than 700-1000 mm (depending on the physical characteristics of the owners) to ensure unobstructed access to the bathing area;
  • installation is carried out strictly horizontally, with mandatory observance of system stability.

Example:

standards

What is the height of the bathtub from the floor?

The standard was calculated based on the average height of a person and is advisory in nature. It takes into account how high the user can lift their leg without experiencing difficulty. Individual differences may influence the set value:

  • if the house has short residents, children, elderly people, disabled people, the indicator can be reduced by an average of 100 mm;
  • in preschool, school, and medical institutions, installation of equipment with a parameter of 500 mm is provided;
  • For tall people, on the contrary, specimens with an increased value (up to 700 mm) are suitable.

On a note! Before starting work, place the container on its legs and climb into it. Be sure to take into account the capabilities of the shortest individual.

Another necessary characteristic is bowl depth - affects the possibility of installing a siphon.
In some cases, it will be necessary to increase the distance between the floor and the bottom of the product by 50 mm if the available space is not enough for installation work. For example, the depth of the tank is 500 mm, we add 150 to the number (the space required by the siphon) and we get the number we need - 650.

Important! The edges should not be higher than this maximum possible level above the floor.

Does the height depend on the type of model?

The installation method determines the features of the selection of models:

  • with metal legswith a metal frame. Used for steel and acrylic structures, protects against deformation.Standard values ​​or fixation at a different, optimal distance are suitable here;
  • using a podium. It is constructed from bricks, blocks, etc. In this case, an additional step may be required so as not to exceed the permissible values;
  • on legs. They are produced solid or adjustable, as a rule, the length of these elements is up to 200 mm.

How is the height adjusted?

There are 3 types of materials from which plumbing fixtures are made, and each of them makes its own adjustments to the installation process:

  1. height adjustmentCast iron products. They have legs and are distinguished by significant weight; they require determining the required size even before starting work, because after work it will be difficult to change the position. Rigid supports are used that do not allow for adjustments. It is possible to raise the structure higher by using wooden (or steel) pads. Place the tank at a distance from the wall or in the center of the room.
  2. Steel accessories. They are less massive and are often equipped with adjustable legs or brackets. They are characterized by instability and require the support of at least one wall. There are exclusive options with an unchangeable parameter.
  3. Acrylic models. The lightest option, they fit perfectly on metal frames; the supplied legs are not equipped with an adjustment mechanism, but they can be easily replaced with adjustable analogues. In this case, you will always carry out the correction to the desired size.

Important! The greatest convenience is provided by sliding screw supports; they can be adjusted according to the rules or at your discretion.

The bathtub is placed so that it is convenient and easy for a person to use it. This is the main selection criterion and regulations allow for changes in standards if they do not provide sufficient comfort and safety. The total height value ranges from 500-700 mm. Space for installation of equipment must be provided.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers