The kitchen faucet is leaking from the turntable

We use faucets in the kitchen much more often than their counterparts installed in the bathroom. It’s no wonder that they cause more problems. They often fail, leaks and other problems appear. Sometimes, to solve them, you need to replace the entire device. If the product leaks, you can invite a plumber or fix it yourself. If you want to try to fix the problem yourself, you will need some experience in this matter. In addition, you need to stock up on everything you need and study the device.

Causes of leakage

A rotary type faucet can leak for a number of reasons. The main ones are:

  1. Wear of gaskets. Manifested by the appearance of water from under the gander. A very common situation, especially for mixers with two valves. This happens due to frequent turning on of the water. To replace them, you simply need to remove the gander by unscrewing the nut. Worn parts are replaced with new ones, which you can cut yourself from a piece of rubber. When putting everything back together, you should not use much effort, as you can damage the base.
  2. Problems with the axle box. In such a situation, the valve leaks and the water does not shut off tightly. To get rid of this problem, you need to replace the element.
  3. Worn hoses or O-ring. A leak appears under the sink. Worn hoses or O-rings need to be replaced.
  4. Marriage. A common situation, especially in products from Chinese manufacturers. Such a mixer is not designed to operate for more than two years.
  5. Poor installation. If the installation was carried out in violation of the instructions, the parts may not be tightened properly.
  6. Incorrect operation. Often the handles are turned at the wrong angle or they put too much pressure on the lever.

If, after some time of good work, problems begin for no apparent reason, then, most likely, a limescale deposit has formed. To bring everything into proper condition, you need to completely disassemble the mixer and clean and rinse all parts.Analysis of the mixer.

Often, a newly purchased faucet can cause problems. This product should be replaced immediately. You should not attempt to repair it, as this will void the warranty.

What to do if your single lever faucet is dripping

Such devices have become popular among buyers. It's all about their reliability and simplicity of design. Their operation is regulated by a cartridge, which can be replaced if necessary.

Reference. The need for repairs becomes noticeable when the water pressure from the tap has decreased, and water drips when the tap is turned off. Why is the water shut off, but there is a leak? The point is the wear of the constipation elements.

Single lever mixer device.

This scheme can be taken as standard, inherent in most mixers. However, we should not forget that products from many manufacturers may differ greatly. But everywhere there is a nut securing the cartridge, which is held by a lever.

The fasteners are hidden behind a cover plate on the body, which has a purely decorative purpose. To remove the cartridge, you need to pry off the cover (you can use a regular screwdriver).

If a leak is visible at the border between the sink and the faucet body, the problem is in the o-ring.Having unscrewed the housing, you need to pull out this ring and install another one.

In fact, you don’t need to know anything else to successfully fix a single-lever faucet on your own. But again, there are significant differences between different models. Therefore, you need to learn the information in the instructions that come with all mixers.

Prevention

Not always after the mixer is repaired, its operation returns to normal. It may also happen that after repair the question arises of replacing the entire device. In order for the device to function as long as possible, you need to follow simple rules:

  1. Install a water filter that removes salt impurities. This will help get rid of the debris and impurities that are found in all our plumbing systems. This will allow you not to think about replacing the device for a long time.
  2. Don't skimp and buy a quality faucet. Brass is considered the best material, silumin is the worst. This is what manufacturers from China and Turkey often use. Mixer in the kitchen.
  3. Opt for a single-lever faucet. This is a higher quality and more convenient design.
  4. When cleaning the product, use products that have a cream or gel consistency. It is necessary to exclude various brushes or alkali-based substances.
  5. Wipe the faucet after each use to ensure no traces of cleaning products remain on it.
  6. Carry out a scheduled replacement of gaskets every three years. These costs are disproportionately lower than replacing the entire device.
  7. Do not press with all your might on the valves when you need to open or close the tap.

Armed with the knowledge of what to do if a leak is detected in the faucet, you can always fix it yourself.The given procedure will help out in many situations, even if the mixer is in the bathroom and not in the kitchen. Before you begin repairs, determine the cause of the malfunction, and when buying a new device, do not be fooled by the low cost. It's better to pay more, but use it longer.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers