How to Protect Your Drain from Hair Accumulation

Everyone knows how quickly and hopelessly the drain becomes clogged with hair. Owners of luxurious hair were faced with the need to urgently remove the blockage. Are there simple methods of control and prevention? Yes, you can quickly remove the trouble using an easy trick with a tie or wire.

hair from bathroom drain

Screed method

screed

Clumps of hair tend to tangle and catch debris, forming a tangle that clogs the water drain. They combat this phenomenon with the help of a nylon clamp. They are used to make kind of traps that capture hair, preventing it from entering the sewer.

It is important to remember that timeliness and prevention will help avoid an emergency.

  1. So, we take two ties, for example, 3.6 * 300 mm, they are sold in any hardware store. If not, then you can take a different size, it will not change the final effect.
  2. It is necessary to make a ring at the end, it will be useful for fixation.
  3. Using a stationery or regular knife, cut small notches along the entire length. The more there are, the better.
  4. Take any metal tube and wrap a tie around it.
  5. Secure with tape or tape at both ends, otherwise it will unfold, taking its original shape.
  6. Heat it with a hairdryer for about 3-5 seconds, but do not overdo it, otherwise the plastic will become brittle and the likelihood of breaking it increases.
  7. As a result, both parts should take on a wavy shape.
  8. Install through the sink or bathtub drain with the rings facing up.

screed

All! They will catch hair, and it is recommended to clean after each bath. To do this, pull the structure out of the drain by the clamps, carefully remove the “catch” and return it to its place.

Wire Twisting

The method was learned from plumbers who come to sewer cleaning with a special strong and flexible cable.

The cable is made of durable steel, has a spiral cut into it, and some types have a brush at the end. It easily penetrates into the most inaccessible places, removing accumulated dirt from the walls.

As an analogue, you can use wire.

  1. Twist the wire and make a small hook out of it. For example, copper wire 1.5 mm thick is suitable.
  2. Gently push down the drain.
  3. Turn around the axis 2-3 times and pull out everything that catches the hook. Some experts advise combining translational and rotational movements to achieve better results.
  4. Repeat if necessary.
  5. Rinse the drain with clean water.

The procedure should be carried out on a regular basis so as not to accumulate clogs. Care must be taken, otherwise there is a risk of damaging fragile plastic structures with metal parts.

Interesting, but in a good drain, proper installation of the bathtub is very important. If it stands on a podium, the angle increases and the water moves away faster, not giving debris a chance to catch on and stay.

Prevention Tips

drain

There is nothing simpler than a set of basic measures to prevent blockages.

  • Place a grate or mesh in the drain hole. They block small debris and hair from entering the siphon. Nowadays stores offer interesting decorative options in various colors.
  • At least 1 or 2 times a month, carry out preventive maintenance with a plunger and pouring hot water, this helps remove adhered dirt.
  • Once a quarter, pour in special products, for example, “Mole” or use traditional cleaning methods.
  • Install hair catchers in the form of clips, wires or chains. As an option, make a “trap” according to the example above.

Using basic “safety rules”, we will no longer face an emergency situation, we will not call a plumber when we are late for work, and we will not worry about blockages. The proposed screed “trap” method is quite effective, and for reliability it is combined with other methods of maintaining order and cleanliness of the sewer system.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers