How to plug a bathtub drain if there is no plug

We all shower daily. But only a long lie in warm aromatic water will help relieve stress and take your mind off the daily routine.

But here you are once again going to soak in the warm water, but you can’t find the cork. What to do? You can go to the store and buy a new one. What if the stores are already closed? Do not cancel the relaxing procedure. You need to use your wits and make a plug from scrap materials.

What can you use for a bath instead of a cork?

So, you decided to take a bath and discovered that the drain plug was missing. To cope with this annoying situation, use the means at hand. So, you may find it useful:

1. Plastic bag. It must be clean. You need to put a small piece of fabric in the bag. Please note that the size of the fabric should only be slightly larger than the diameter of the water drain hole. The flap must be folded several times and placed inside polyethylene. The bag should be tightly tied and placed in the drain. When you start drawing water, the improvised plug will be sucked in and the water will not flow out.
2. Foil. A piece of foil needs to be folded several times and plugged into the drain.
3. Cup. You will need a plastic cup as the glass product may break. The glass must be installed in the hole, placing it upside down.
4. Styrofoam. You should cut a piece exactly the size of the drain.
5. Sock. The fastest and easiest way. Take one or more socks, scrunch them up, and plug the drain. You can also pour a small amount of sand into a sock and wrap it in plastic.
6. Sponge for washing dishes. Fold it so that it fits into the drain, then wrap it in cellophane - the plug is ready.
7. Newspaper, paper sheet. The option is fast, but short-lived. You will need newspaper or sheets of paper. Fold them tightly several times and place them in the water outlet.

What and how to make a bath stopper from

You can make more than just a temporary plug with your own hands. To do this, you do not need to purchase special materials; everything you need can be found at home or in the country. What can you use?

You can use the following:

1. Tree. Simple, but not very reliable material. Without special impregnation, the wood will begin to swell.
2. Silicone. This is a more reliable option, since silicone is not afraid of contact with liquids.
3. Rubber. The most suitable option is that the material is flexible and does not deteriorate when exposed to water. You can use regular bottle caps.
4. Flip-flop. A great option is to make a plug for the drain hole from an old slipper.
5. Kids toys. Toys in the shape of a small ball are suitable.

Making a drain plug:

1. Wooden. Measure the diameter of the hole for draining the water, then transfer the resulting measurement to a wooden block. Carefully cut out the cylinder and sand it using sandpaper. You can make a hole in the upper part and insert a chain or any strong cord into it. To ensure that the resulting plug serves you for a long time, cover it with several layers of special hydrophilic impregnation.
2. Rubber plug. To make it, you will need several wine corks, which should be fastened together. There should be no gaps between the plugs. Otherwise, the product will begin to leak liquid.
3. From a slipper. A rather labor-intensive option, because you will need to carefully cut a piece of the required diameter from the shoe. After which the circle should be sanded with sandpaper.
4. Children's ball. The toy must be cut into two halves, a chain and a strong cord must be inserted. Then fill the product with silicone.
5. Plastic bag. Instead of a ball, you can take a clean bag. It should also be filled with silicone, giving it the required shape. When the material is completely dry, remove it from the bag.

Important! Choose mounting silicone that is harmless to the human body.

Using these simple methods, you can make a drain plug at home. You just need to find the necessary materials and spend a little time.