How to clean an acrylic bathtub

Recently, acrylic bathtubs have been gaining popularity. This is explained by the fact that such plumbing products can come in a variety of shapes. In addition, they are practical, environmentally friendly, and have a beautiful appearance.

Acrylic is a type of plastic and therefore has poor mechanical resistance.

If you have decided to update your bathroom and have chosen an acrylic sanitary ware, then you need to know how to properly care for the bathroom so that the product will last for many years.

General rules for caring for acrylic surfaces at home

Like any other type of plastic, acrylic does not tolerate mechanical stress well - from a strong impact or when cleaning with abrasive detergents, scratches or chips can form on the surface of the product. Therefore, such a bathroom must be properly cared for.

To ensure that your bathtub will serve you for many years, follow a few simple recommendations:

1. To prevent the appearance of a yellow coating, after each use the bathtub should be rinsed with warm water and wiped dry with a soft cloth or paper towel.
2. The bathtub must be washed and rinsed every day.To do this, you need to soap the sponge with laundry soap and treat the entire surface, after which you need to rinse off the soap solution and wipe the bowl dry.
3. Be sure to thoroughly clean the bathtub with detergents once every two weeks. The chemical composition must be applied to the surface and left for the time specified in the instructions. Then the product is washed off and the bath is wiped with a cloth.
4. The bathtub must be disinfected every six months. To do this, you need to fill it with warm water and dilute a special disinfectant in the liquid. After waiting the necessary time, the water should be drained, the bowl should be rinsed thoroughly, and the room should be ventilated.
5. If chips or scratches occur on the surface, they should be repaired immediately to prevent further deterioration of the acrylic.

Acrylic bath cleaners

Limescale and yellowness can be eliminated using both special and folk remedies.

Household chemicals

Store-bought cleaning products for acrylic bathtubs include gels, sprays, and creams. Their composition is designed specifically for cleaning delicate surfaces. You can purchase such substances at any hardware store. The most popular are:

1. Acrilan. The product is very popular among housewives. It not only quickly removes dirt, but also returns acrylic to its original shine.
2. Cif. A universal remedy. There are no coarse particles in its composition, so it can be cleaned without fear.
3. Cinderella. The product is very effective in fighting stains, but has a strong chemical smell, so wear a respirator when using it.

If there is slight dirt on the bowl, you can use liquid soap or dishwashing gel.

Reference! When cleaning an acrylic bathtub with a professional product, you will not only remove the accumulated dirt and yellowness, but also return the original color to the sanitary product.

Available means

If you don’t have the necessary store-bought product on hand, don’t despair - you can use traditional methods for cleaning an acrylic bathtub:

1. Lemon acid. A real lifesaver in solving everyday problems. Dry acid in an amount of 50 g must be diluted in hot water previously collected in the bath. The water temperature must be at least 50 degrees. The solution should be left until the limescale dissolves. This may take several hours, after which the composition is washed off, the bowl is rinsed and wiped dry.
2. Apple vinegar. Will help get rid of yellow plaque. To do this, first prepare a solution: dissolve 20 g of vinegar in a glass of water. Moisten a soft cloth with this mixture and carefully treat all problem areas. After completing the procedure, the bath should also be rinsed and wiped.
3. Baking soda. Mix soda with water until you obtain the consistency of sour cream and apply the mixture to the required areas. No need to rub! After 15 minutes, rinse off the soda and rinse the bath.
4. Toothpaste. It can cope even with severe dirt. Apply a small amount of paste to a soft cloth and work over the desired areas. Rinse off any remaining paste with running water, then wipe the surface dry.

Reference! Before you start cleaning your acrylic bathtub, apply the cleaning solution to a small area of ​​the product. This way you can check whether the substance will damage the surface.

How not to wash an acrylic bathtub

Some substances can damage acrylic, so you should not use them to remove stains. These include:

1. Acetone. The substance is an excellent plastic solvent.
2. Substances with abrasive particles. When cleaning with such compounds, deep scratches form on acrylic.
3. Chlorine-containing compounds. Such products include Domestos, which is very popular in the care of plumbing fixtures. Bleach corrodes acrylic, which leads to the formation of microcracks. This shortens the life of the bath.

Attention! Before purchasing a cleaning product, carefully read its composition. It should not contain substances that can harm the acrylic bathtub.

Maintain your bathroom regularly and use only approved products. This way you can not only maintain the original appearance of the product, but also extend its service life.