Tricolor: no signal on all channels. What to do and how to configure

When there is no Tricolor signal, most often the reasons are completely independent of the specific equipment, that is, they are related to the company itself. For example, the operator has organized preventive work, it is raining or snowing heavily. But it also happens that equipment fails - an antenna, converter or receiver. Then it is necessary to correctly identify the influencing factor and eliminate it. How to do this is described in detail in the presented material.

Objective factors

When there is no Tricolor signal on all channels, all causes of failure can be divided into 2 groups - objective (external), which are associated with the operator, and not with the antenna, and internal, which indicate a problem with a specific receiver.

Understanding what to do if there is no Tricolor signal is possible only after correct diagnosis. Since most often the equipment works normally, it is recommended to start by clarifying the external circumstances:

1. If there is no signal from the Tricolor satellite dish, the reason is often quite simple and is due to the fact that the operator has started preventive maintenance. This is a planned procedure, which you can find out about in advance by calling the call center. It is also recommended to check the information on the operator’s website.
2. It also happens that Tricolor TV does not have a signal due to bad weather. Basically, the receiver operates smoothly even under adverse conditions. But if there is a strong thunderstorm or heavy snowfall, rain, interference can actually be observed. They pass automatically as soon as the situation in the atmosphere stabilizes.
3. It is possible to figure out what to do when there is no Tricolor TV signal by looking at the horizon. For example, a tall tree or a newly built house may become an obstacle. It is recommended to look at the sun at 1 pm during the day and mentally draw a line from it to the plate. Ideally, there should be no obstacles on this straight line.

Internal reasons

If all the described cases do not apply, and Tricolor writes: “no signal,” it is necessary to find equipment failures. The most common defects are described in detail below.

The plate has gone astray

An explanation for why Tricolor writes “no signal” can be explained by a problem with the dish. In the simplest case, it simply changed its position, and in this case a deviation of even a few degrees is important. Sometimes the surface becomes deformed due to impacts or wears out over time.

You need to carefully examine the plate in good lighting and try to move it up, down, sideways. If there is a slight loosening, Tricolor will write “no signal” even on the info channel. It is necessary to secure it carefully by tightening the clamps and nuts. If there is significant damage or rust is noticed, it is better to replace the plate with a new one, because in this case problems with communication will occur regularly.

Dish contamination

Another option for what to do if there is no signal on the Tricolor TV also involves inspecting the surface of the main element, that is, the plate. There may be noticeable contamination on it, snow and ice freezes in winter, and frost forms. The solution is clear - you need to carefully clean the surface. But you need to work in such a way as to prevent shifting. Therefore, it is recommended to first move the plate a little to make sure that the fastenings are secure.

Converter failure

Why there is no signal to Tricolor can be explained by problems associated not only with the dish itself, but also with the converter. It can also suffer from heavy rainfall, pollution, or collisions with various objects. If there are scratches or integrity problems, the part should be replaced with a new one. After this, the “no signal from the Tricolor satellite antenna” symbol should disappear.

Cable damage

When analyzing what to do if Tricolor writes “no signal,” it is also advisable to carefully inspect the cable along its entire length, as well as its connections. This is a fairly strong unit, but sometimes it fails due to prolonged exposure to bad weather. When inspecting the cable, you need to make sure that it is intact. You should also inspect the connections in good light - they should be free of defects.

Receiver failure

If all the previous measures did not work, and Tricolor writes “no signal,” here’s what to do next. You need to make sure the receiver is working. This is not always easy, since you need to move the device and connect to a working antenna.

You can go to your neighbor and diagnose the presence of a signal. If it is there, then the device is working.If, even when connected to a working dish, Tricolor TV writes “no signal”, it is quite clear what to do next. You'll have to buy another receiver.

Settings on TV failed

You can really figure out why Tricolor doesn’t work and there’s no signal today by checking the TV. In this case, they take the remote control, press “OK” and look at the screen. Normally, a list of TV channels should appear, but if it does not load, the reason is due to a violation of the TV settings. Fixing it is quite simple - you need to open the menu and find the correct input for the receiver.

Weak, intermittent signal

All common cases when there is no signal on the Tricolor TV are discussed above. But sometimes there is, in fact, a signal, although it is quite weak, so the broadcast freezes or the image is of too low quality. In such situations, you should inspect the area and determine the presence of obstacles directly along the direction of the signal, that is, in the direction where the antenna “looks.”

If you haven’t used the TV for a long time, and Tricolor says “no signal,” the reason is probably due to overgrown thick branches. This is a fairly simple situation because the problem is not difficult to solve. But if the cause is a newly built house, you will have to change the location of the antenna.

Now it’s clear what to do when Tricolor writes “no signal” on all channels. If all the described solutions are not suitable, and the breakdown has not been fixed, it is recommended to contact the hotline and order a call from a specialist.