How to install an antenna for a TV

TV allows you to keep up with the news, and also remains one of the main ways to relax after a working day. However, a necessary condition for its high-quality operation is connecting an antenna. Modern models can connect to the Internet, but this is not enough, because you need an antenna to watch your favorite channels. Even satellite TV works on the principle of receiving and transmitting a signal through an antenna plug.

Reference! The television cable and antenna plug do not conduct current, so you can install it yourself without fear of injury.

How to choose the right cable

You should definitely trust a professional when choosing a television cable. There are several varieties that have their own pros and cons. These factors can affect the duration of use and even directly on stable operation.

You need to choose a wire according to its resistance to temperature and humidity changes. They are influenced by the quality and density of the braid, diameter and special impregnations. There is also additional reinforcement using a carbon layer. In other words, the thicker the better and more climate resistant.

By location

The first thing to think about: where will the wire be laid?.

• If the antenna is located on the facade of the house, the diameter is from 8 to 10 mm.
• Wiring on a window or balcony - up to 7 mm.
• If it’s in the entrance, both the first and the second will do (depending on whether the entrance is warm and where the cord comes from: roof, window, etc.).

By signal type

The options for satellite and cable TV also differ, that is, the choice depends on the type of signal. The device, of course, is the same, but the way the signal passes is different. Satellite goes over the copper core, and cable goes over the conductor. Wires with a thin core will not allow the satellite signal to pass through, so for such a TV you need to choose thick types.

By configuration

The third thing you need to pay attention to is the equipment - connectors, adapters and splitters. They must be of the same diameter and be angled so that the cord does not bend. Length is an individual matter. You can calculate the distance in advance taking into account the indentations. Or buy it with a reserve - it will come in handy when reinstalling the antenna or changing the location of the TV.

Connecting to a TV

The connection follows the principle of a plug into a socket - the plug is attached to the TV socket. However, before this, the part must be placed on the cable itself.

IMPORTANT! Despite the safety of the television wire, it is recommended to work with rubberized gloves.

Connection process simple

• A circular cut of the sheath is made on the cable - approximately 1.5–2 cm from the edge.
• The screen hairs and foil are bent towards the wire (cannot be torn).
• The entire inner layer of insulation is cut and removed.
• The plug is screwed onto the bare core clockwise until it stops (to the insulation layer).
• The protruding remainder of the core is cut off.

Cleaning is done with extreme care to avoid damaging the screen hairs and internal insulation.. Otherwise, the signal will be transmitted with interference and you will have to redo the installation of the plug.

How to run a cable around an apartment

A well-laid TV cable is a guarantee of a good image. The first step is to decide where to mount the distribution panel.

IMPORTANT! Do not confuse the distribution panel with the electrical panel - they should be located separately.

The optimal installation method - from the shield directly to the TV. To keep it out of the way, it is recommended to place it under the ceiling, where it can be covered with special plastic panels. This way the wire will not be damaged if there are pets. You can also extend it to the TV under the baseboards.

More economical way: connect splitters in series. However, if the outlet breaks down, the signal will be interrupted and you will also have to spend money on repairing the television cable.

It is also possible The most cumbersome option: run the wire in the wall.

How to connect an antenna cable at the entrance

Often the cable is laid in the roof of the house, after which it is equipped with amplifiers and routed through distribution panels in the entrances. The wire at the entrance is connected to just such a distribution box, in which splitters (crabs) for different software packages are already preinstalled. You just need to connect the wire from your apartment.

ADVICE! If you don’t understand which sockets are for what and which wire to use for the entrance, then be sure to call a teleworker who will make a complete connection.

In this way, the television cable is selected and connected to the distribution panel both in the apartment and outside the living space. You can install the antenna yourself or with the help of a specialist.In this case, there is a greater chance of avoiding incorrect installation.