TV won't turn on after power surge

Even the most expensive and new TV model can fail due to voltage surges. To understand what the problem is, you should conduct an initial diagnosis of the equipment and find the cause of the malfunction.

Reasons why the TV does not turn on after a power surge

First of all, after a power surge, you need to pay attention to the power supply and cables. The equipment must be connected to the network. Otherwise, the signal simply will not arrive and the TV will not turn on.

Important! Make sure that all cables are intact and not crushed by heavy objects.

Another reason could be burnt-out contacts in the socket. Due to overvoltage, the contacts melt. A short circuit may occur. Therefore, when you turn on the TV, the screen will not light up.

In some cases, the TV does not turn on immediately. The reason for this problem is the hardware of the TV. Sometimes the batteries in the remote control are weak and the contact is weak. Therefore, when you press the button, the plasma does not turn on immediately.

Voltage fluctuations can cause system failures in new modern models. Because of this, the screen does not light up. However, in this case you should pay attention to diodes. If they blink, then the problem is in the system. If not, the TV will burn out.

What to do if the TV does not turn on after turning off the lights

If after turning off the lights the TV stops turning on, first of all you need to check whether the remote control is working. Change the batteries and try pressing the button again.

If replacing the batteries does not help, check the presence of electricity in the sockets and wires. You should also inspect the fuses in the house. Then try turning on the TV again. If the equipment turns on, but there is no image, then the problem may be in internal parts that have failed. Only a master can say for sure.

Power outages happen quite often. No one is safe from them. Due to such fluctuations, appliances in the house often burn. If your plaza stops working after a power outage, you need to find out the cause of the problem and try to solve it yourself. When the problem cannot be solved on your own, you should contact a specialist.