How to turn on the TV without a remote control

It's hard to imagine controlling a TV without a special remote control. This thing allows you to quickly and easily change channels, speed, sound and set other settings. However, there are situations in which it becomes necessary to control equipment without a remote control.

Is it possible to turn on the TV without a remote control?

In conditions when the power button on the TV remote control does not work, the question arises of connecting it in another way. If we look at the Soviet model, then on the front of the case you can see many control buttons. As a rule, they were large in size and had hints in the form of inscriptions. There were practically no difficulties with setting up the equipment.

Many people mistakenly believe that modern models cannot be turned on without using the remote control. TVs are thin panels with a thin frame around them. This is explained by the fact that many manufacturers strive for minimalism by hiding the treasured buttons behind the back wall or on the side.

ATTENTION. It is worth understanding that there is not a single television device that does not have manual control.

How to switch the TV without a remote control

So, wondering how to switch the receiver without a remote control, the first thing you need to do is find the keys on the case panel. To do this, it should be carefully examined. Thus, manufacturers Toshiba and Phillips place buttons on the left side of products. In Bravia and Panasonic they can be found, on the contrary, on the right side. But Sony, Samsung and LG have buttons on the back of the device. You should know that the location of the main buttons depends on the specific modification of the TV.

IMPORTANT. Each TV should have a manual for proper operation, in which you can find the main points on operating the product.

Standard designations

The names of the TV buttons, regardless of the manufacturer and model, will in most cases be the same. Let's look at the main key sets:

• POWER. This main button will help you turn your device on or off. In most cases, it is slightly different in configuration from the others and is located separately.
• < and >. By clicking on these symbols you can switch channels or menu sections.
• + and –. These keys increase and decrease the sound.
• MENU. Allows you to turn on the device menu and select the necessary options. In some modifications, it also serves as a boot and shutdown key.
• OK. Allows you to confirm the selected action.
• AV. Used to select the mode in which additional devices can be used. In some products, the mode is activated independently and this button may not be present.

How to turn on the TV without remote control and buttons

HUAYU has released a multifunctional development. This is a special control panel that is suitable for most TVs, set-top boxes, audio systems and other devices. It includes the coding of almost all world brands. Therefore, many experts recommend having such a device in every home. Products from BILAIN and SUPRA are also being distributed.

Switching channels

After the device is turned on, you should figure out how to switch channels. Usually, immediately after turning on the device, programs of the channel on which it was turned off or which was designated in the settings begin to be shown. To do this, use the < and > keys. By clicking on them, the channels will change in ascending or descending order. If there are no such symbols, you need to find + or – and use the general menu. In a special section you should find the channel switching function and start searching for what you need.

Setting up without a remote control

There are TVs that have one large button, similar to a joystick. It is easy to control by pressing the central button. Let's look at the features of working with the joystick using the example of contrast settings:

1. First you need to open the general menu by simply pressing the joystick in the center for a couple of seconds.
2. Next, a table of contents should appear on the monitor listing the available parameters, from which you should select the one you need.
3. In this example, select the “contrast” button by pressing the joystick buttons up or down. Then we fix this function by pressing in the center.
4. Change the contrast using the left and right keys. The selected parameters are also saved by clicking on the cent.
5. To close the menu, hold down the center button for a few seconds.

This principle is relevant when setting various parameters and functions.You can manually configure a specific sequence of channels so that you can quickly find them in the future. To do this, select the “Channel setup” item and click the “Manual setup” subsection. In the “Programs” section, each channel can be assigned its own specific number. You can also customize the sound characteristics and color of the region. Next, the found channels are saved in the device’s memory, and to find additional ones, all the above steps are repeated.

Controlling your TV using your smartphone

Thanks to modern developments, it has become possible to control equipment using gadgets. To do this, a special program corresponding to the TV model is downloaded to the mobile device. The Google Play platform offers a wide variety of applications for various models of equipment. The TV must have certain parameters:

• Connection via Etnernet (RG-45);
• Possibility of connecting via Wi-Fi network;
• Option “Remote control”;
• “SmartTV” or “InternetTV” option.

REFERENCE. The mobile device and TV must be connected to the same network. For a phone, this can be a Wi-Fi network, and for a TV set, a wired LAN connection.

The remote control is a unique development that makes life easier for the average TV watcher. If you lose this device due to breakdown or loss, there is definitely no need to panic. After all, you can turn on the TV and control it without using the remote control. We hope that this article will be useful and help you understand the intricacies of turning on the TV.