How to disassemble the TV remote control

TV is an integral part of the life of any person, regardless of his gender and age. Even if the average person prefers to use media from the Internet most of the time, he still needs to deal with TV devices to watch movies or TV series on the big screen. All TVs are equipped with special remote controls that allow you to control settings without leaving the couch. This addition to the TV is undoubtedly useful and makes the device easier to use, however, this thing is quite fragile and susceptible to external influences, which can cause damage that needs to be resolved.

Why do you have to disassemble the TV remote control?

Usually the remote control is disassembled if you want to find out why the device is not working correctly. And also to troubleshoot problems on your own. Often, disassembly and assembly of this device is necessary during cleaning. The device often gets dirty, which interferes with its operation, so regular cleaning is essential.

The remote control is quite complex, so not every user will be able to immediately diagnose and fix the problem. You should not disassemble such a technologically complex device without special knowledge and skills.

Although everyone is sometimes interested in seeing “how everything is inside,” so below we will provide detailed instructions on how to properly disassemble and reassemble the TV remote control.

Disassembling the remote control may not be such an easy task, especially if the device does not have connecting bolts, which may confuse some users.

Attention! Remember that brute force can damage the chip. Which will lead to a complete malfunction of this device.

In order to disassemble the remote control, the user only needs a small screwdriver. A flat one is better, but a cross-shaped one can also come in handy. Therefore, it is recommended to have both options on hand.

If, in addition to disassembling, you plan to clean the device, you should prepare an alcohol solution (with a high C2H5OH ratio) and cotton swabs or napkins.

You should also prepare a soft and clean surface where the user will place the chip.

Instructions on how to disassemble

If the mount is bolted:

1. First you need to remove the batteries. There are usually connecting bolts under the nutrient compartment cover. You should unscrew them using a special screwdriver.
2. After the bolts are removed, carefully separate the two parts of the housing.

Attention! Do not use brute force as this may damage the fastening mechanism or the chip.

Inside, the user will be able to see a rubber gasket on which the buttons are located, and under it the chip itself.

Attention! Unscrewed parts should be placed in a separate place so as not to be lost.

The remote control may be considered disassembled. Next, we will consider the option in which no connecting bolts are found on the device body.

1. After the batteries are removed, insert a flat-head screwdriver into the junction of the housing.Typically, special latches are located at the top and bottom of the case, so the screwdriver should be inserted there.
2. After the user hears a characteristic click, the latches at the other end should be opened.
3. Once both fastening mechanisms are open, carefully separate both halves of the housing.

Here are a couple more tips when disassembling the TV remote control.

Some covers have additional latches and do not open upward, but by moving to the side or forward.

The chip is usually not secured. It often just lies in the grooves, and removing it is not difficult. After removing the microcircuit, do not place it on a dirty surface, as dirt may interfere with the functionality of the buttons.

When removing the chip, be careful with protruding parts such as capacitors and the emitting LED. If these parts are damaged, the remote control will completely lose its functionality, and restoring them without special knowledge and skills, as well as without additional accessories in the form of a soldering iron and a magnifying glass, will be problematic for the average user.

If disassembling the device is due to the need to clean the microcircuit from dust or dirt. Then you should use an alcohol solution. It can clean the contacts and restore the functionality of the remote control.

It is also worth cleaning not only the contacts of the microcircuit, but also the buttons on a special rubberized gasket.

After cleaning, allow the parts to dry before reassembling.

If simple cleaning does not help restore the functionality of the device, you should take it to a repair shop or purchase a new one.