How to properly strip the antenna cable for a TV

Television has become so popular that almost every apartment has this familiar device. Most users, when connecting digital or any other television, prefer to trust professionals and do not take part in the connection process at all. But can you do it yourself?

There is nothing complicated about connecting your TV to an external signal using an antenna cable. Even a beginner can cope with this task, and you will read about all possible difficulties and mistakes in this article.

How to strip the antenna cable for a TV

The first step is to strip the coaxial cable under the F-connector. This stage can frighten inexperienced users who do not understand why this is needed and are afraid of damaging the wire. There's no need to panic.

The fact is that similar connectors are common in most modern TVs, and “adjusting” the wire to it will take no more than a minute. If you strictly follow the instructions provided and act as carefully as possible, then everything will work out the first time.

Required Tools

Note that you won't need many tools to strip the cable. You will need:

• knife.
• wire cutters.
• cable and connector.

All this can be found in any apartment where there is a suitcase with tools, so you don’t have to go to the store for new purchases. When everything you need is already at hand, you can start working.

Algorithm of your actions

1. First, make a circular cut into the outer insulation about 12mm from the edge.
2. The shell is removed, and the screen without foil is bent.
3. Now we make a similar cut on the internal insulation, retreating at least 8 mm.
4. Remove the internal insulation.

Now we screw the connector onto the wire. Job finished!

How to properly connect the antenna cable

Many have had to deal with a situation where the wire length is simply not enough. In this case, you should try to lengthen it.

There are several ways to do this, but the simplest is extension using F connectors, which can be purchased at a specialty store. Before you get started, you need not only to purchase these connectors, but also to cut the wires of one and the second section.

IMPORTANT! Please note that connectors come in different sizes, so it is extremely important to either know the size you need in advance, or take the wire with you so as not to make an annoying mistake when choosing.

Preparation comes down to the fact that it is necessary to cut the outer sheath of the wire, wrap it back and remove it at the first cut point. Then we bend the screen and strip the main core. Be very careful when removing the insulation so as not to damage other important cable elements that will affect the performance of the TV. Then F conductors are wound onto the cable, with the help of which the pre-purchased connectors are subsequently secured. This will complete the cable connection and give you the required length of wire.Now you know how to strip the cable and also extend it if necessary. With this knowledge, you can connect the TV yourself and enjoy your favorite programs and series at any time.