How to connect speakers to a TV

Of course, if you are a fan of watching TV, then you need special conditions. Because for some people, this is not only a regular break from work, but also getting pleasure and new information with the help of modern technologies. Therefore, it is so important to pay special attention to arranging your vacation spot. Thus, most people prefer to install special speakers so that the sound is of the highest quality. However, it is recommended to consider various points before the process. In this article, we will try to understand this topic in detail and find out intermediate facts that will also help simplify the work.

Types of inputs and connectors

Modern televisions have connectors for a variety of purposes. Here we will look at the most basic ones.

1. Video. This is considered the most common - HDMI. It is this that allows you to transmit a signal even on a wide variety of digital devices. Each device is equipped with such a hole, and some may even have several. Accordingly, absolutely every user can enjoy high-definition images or video recordings.
2. Next comes the ability to connect your computer to television, which RGB provides. As for quality, this is a slightly weaker option, since the entire load goes to the connection with the digital signal.
3. To use the multimedia device, you need a SCART. With its help, both audio and video signals and control communications are transmitted. If we touch on the topic of picture image, it will be noticeably worse than HDMI. In addition, the connection can be correlated with the same mechanism.
4. S-video. It represents the transmission of not only a color signal, but also a brightness signal. However, in modern times it is increasingly rare to see this connector in use.
5. CVBS. Statistics show that this is one of the worst options. The opinion is explained by the fact that it is he who uses not one or two analog signals, but three at once. Naturally, the quality will be worse.
6. The last connector of the “video” type is component. Here the signals are not mixed, that is, the image is clear.
7. Speaking about audio, you need to remember the mini-jack and RCA connectors. The first of them is used to connect small equipment, and the second is used for red, white and audio channels.
8. The next category is the so-called “other” connectors. You can find one like for an antenna. In addition, there is a network port, which helps you connect to a local network or the Internet. USB is needed exclusively for the use of various external storage devices.

What speakers can be connected to the TV?

An excellent option would be to purchase a speaker system. Because with it you will be provided with excellent sound and the absence of extraneous noise. In addition, it can include additional subsystems.So, one of which is active. A special feature of this device is the built-in additional amplifier.

The second component is passive. It is, accordingly, the opposite of the previous option. Usually there is also a horn system, which does not need any amplification mechanism at all. To enjoy the bass, it is recommended to purchase a subwoofer. It is this that provides low frequencies and is considered a specialized speaker.

REFERENCE. As for the simplest method for realizing sound, it is a soundbar.

Is it possible to connect computer speakers to a TV?

Yes, of course, they can be connected. Only the principle of the process will be the same as with active equipment. This will require special round sockets with a diameter of 3.5 millimeters. This does not cause difficulties even for the most inexperienced users. It is enough to understand a little about this topic and its location - the back panel of the device.

How to connect speakers to a TV

As you know, there are several varieties of acoustic systems, namely methods of connecting the structure. Below we will analyze each of them for a complete understanding.

Active acoustics

As mentioned above, the meaning of the name is revealed in the principle of operability, namely the presence of an amplifier in the process, which requires a separate power supply of 220 V. If we talk about the composition of the structure, then it is worth mentioning two columns, one of which has that additional element built into it. The connection itself consists of the following positions:

• The connector used is called “tulip”.To do this, you will need only white and red plugs from its part. They will need to be inserted into slots of the corresponding color. They can be located either on the side of the panel or on the back - depending on the model of the structure. This method is the most practical, since it is possible not only with modern technologies, but also with old models.
• Mini-jack. In this case, you may need to additionally purchase an adapter.
• Connecting all wires directly directly. There is a generation of TVs that have connectors for exposed parts. They are directed, accordingly, directly from the speakers.

Passive acoustics

In this case, the amplifier is built directly into the system - a feature of this mechanism.

ATTENTION. To connect the components, it is very important to consider and pay attention to the polarity of all wires.

Thus, the output on the left side should be connected to the left column, and the right one accordingly. But this applies exclusively to a system that has only two columns. It may be that availability exceeds the stated number. In this case, you will have to purchase a specific unit - an AV receiver. It is he who will be able to connect all connections into a linear one and convert all possible signals. If you are the owner of a built-in receiver, then this will greatly simplify the connection for you, that is, you are very lucky.

How to connect a soundbar to a TV

It is very important to first decide on the location. Because the further convenience of interaction will depend on this.

• Next is to deal with the wires. Of course, it is best if the TV is ready for digital connection.However, if this is not possible, you can use analog. If you have the option of both the first and second methods, then choose according to your preference.
• Then you can verify the presence of an audio signal. This means checking the fact that the signal was sent. To do this, it is advisable to go to the TV menu and turn on external speakers instead of the built-in ones. Thus, it is connected once and for all. If you still change your mind about viewing channels through the latest system, you will have to open the settings again and do all the manipulations in the opposite order.
• To use a DVD player or other similar digital sources, you will need a coaxial cable.
• To equip the equipment of portable devices, you will need a mini-jack. It can be connected directly on its own or using an additional adapter.
• In addition to the methods presented above, there is one more. The signal through the soundbar can be transmitted using HDMI. To do this, you need to activate the function through the settings and menu of the TV. Thanks to this method, you will be limited in the availability of the necessary wires, and the sound itself will not deteriorate at all. Of course, it is better to first read all the instructions that come directly with the device.

How to connect a subwoofer to a TV

Acoustics are also distinguished here into active and passive. However, you first need to figure out the place where the entire structure will be located. So:

• When active, you should know that there is an automatic setup using the service menu of the television.As in the previous paragraph, you should refer to the unit parameters and indicate the setting you need. Thanks to modern technology manufacturers, the entire process is greatly simplified, which has a rather positive effect on demand among potential buyers.
• Speaking about the passive variety, it is worth remembering a certain sequence of actions. First you need to connect special wires to the receiver or home theater. After which the subwoofer is connected to the first of these devices in a certain way. Namely, this is done so that the unit is parallel to the front speakers.

ATTENTION! How correctly and carefully you approach the issue of equipping polarity will directly determine the service life of the entire system. Therefore, it is so important to treat this with understanding and accuracy.

In conclusion, I would like to note that there is definitely nothing complicated in all the processes; you can connect any equipment to the speakers. Even the most inexperienced master can cope with all the actions without the intervention of qualified specialists and additional equipment. You just need to know the basic rules that greatly simplify all the work with connecting and devote time and attention to the most seemingly insignificant details.