How to connect DVD to TV

Often when buying a DVD, problems arise with connecting the device to the TV. Experts recommend that when purchasing equipment, pay attention to how to connect it to a TV, since some models are not suitable for all types of TVs and require special connectors and adapters for connection. How to properly connect DVD to TV?

How to connect DVD to TV

It's easy to connect a new DVD to your TV. First, read in detail the instructions that came with the device. Then you should examine the components. Usually the box contains 1-2 types of cables for connection. Examine the connectors on your TV and DVD. Then follow the following instructions:

1. Turn off all devices from the network.
2. Remove the RCA, HDMI or SCART cable from the box (depending on which one is included).
3. Connect one part of the cable to the TV, and the other to the DVD.
4. Turn on the TV, and then the second device.
5. In the settings, select the DVD playback format.
6. All is ready.

After which you can safely insert discs into the video player and enjoy watching movies.

Important! If the kit comes with only one cord and it does not fit the TV, you will need an adapter or an additional cord, which can be purchased at an electronics store.

Inspection of connectors and wires, comparison

To understand how to connect one device to another, you need to study the available connectors in detail. Modern models have the following types:

• HDMI. Available only in modern models, an excellent option for viewing content in good quality. The connector allows you to transmit sound and video to a large screen.
• RCA. The most common option, which is found in both old and modern models. This connector is also called a tulip, as it consists of three-color sockets, each of which is responsible for transmitting audio and video.
• SCART. Quite rare in modern DVD models. It can only be connected using a special adapter.
• S-video. It is used extremely rarely, unless the above options do not work for some reason. This connector allows you to display only an image on the screen. To play sound you will need an additional speaker output.

Remember! There are no hopeless situations, so if one of the connectors does not fit, you can always try other options or use an adapter.

What adapters and wires may be needed?

If you couldn't connect the DVD via the cable included in the kit. You can always use an adapter. You should buy an antenna connector at the store. Through it you can connect the DVD cable to the TV.

An RF (RF) unit may also be useful. It comes complete with old consoles. Therefore, if you have an old Sega or Dendy lying around at home, you can take the block from them.

Connection diagram

First of all, we inspect the box set. Usually, an RCA cable or, as it is also called, “bells” comes with a DVD. The cord has three branches of red, white and yellow (the first two are responsible for sound, the last for image).

We find the connectors on the TV. Now you need to insert the plugs by color into the TV and DVD. The device is ready, you can play your favorite movie on disc and enjoy a pleasant viewing experience.

How to connect a DVD to an old TV

To connect a DVD to an old TV you will need a special cable and adapter. The algorithm of actions is as follows:

1. Study the contents of the box. Look at the wire that comes with the kit.
2. If there is a SCART wire with wide connectors. Then you can safely use it.
3. You need to insert one plug into the TV, and the second into the DVD into the corresponding connector.
4. You can turn on the equipment to watch movies.

Sometimes it happens that the TV and video player do not have the same connectors. In this case, you will need an adapter. There are different types of conductor wires. Here you need to take into account the available connectors on the TV and DVD.

Types of connectors on old TVs, what you will need to connect

Older TV models have fewer connectors. They usually have two connection types:

• A/V for 3 color jacks.
• Component with five colored plugs.

Usually, modern DVD models can only be connected to an old TV using an adapter cable. After all, modern versions are equipped with an HDMI connector, which is easy to connect.

Connecting one device to another is easy. The main thing is to follow the instructions and insert the plugs correctly. Remember that all wires must be inserted only into connectors of the same color or the same parameters. A DVD player allows you to watch your favorite movies on the big screen and enjoy surround sound and good video quality.