Double image on TV

TV is the most popular household appliance that everyone probably has at home. These devices have already appeared even in the most remote places. But users often have to deal with various problems that interfere with viewing. In order not to pay a lot of money for the services of professional craftsmen, you can deal with some of the interference yourself.

The most common problem is that the image appears double. There are several reasons why such a defect may occur. In order to fix the problem, you need to carefully study each possible cause and check the TV for the presence of one of them.

Don't panic - almost every model sometimes displays double images. So why is this happening?

Why does double image occur?

The first thing you need to do is check signal level, supplied to the television receiver and its settings. If you have an antenna, check its position.

There are also some problems that are specific to screens with certain technologies, from the oldest models to the newest. To understand the reason for the splitting, inspect the TV in detail. And if you don’t know what kind of screen you have, find the information on the box or on the Internet.

One of the new screens that provides the ability to view files in the highest quality is called LCD LED. Such a device may show a double picture due to a breakdown of the controller or matrix cable.

REFERENCE. Sometimes there are problems with the memory or motherboard, as well as problems with the processor.

• Projection screen differs in that here the quality and realism of the picture is achieved using mixing chips. If any errors occur in their work, the image is transmitted with defects.
• Plasma screen usually provides consistently high quality work. Problems rarely arise with such TVs. But if this happens, the error most often lies in the operation of the image output unit.
• CRT The device may cause some inconvenience. The television receiver may have interruptions in the functioning of the unit or vertical and horizontal scanning systems.

When the cause is found, you need to either begin possible repairs or call the experts. What can you do yourself?

Ways to solve the problem

• First you need try to change the antenna position. Perhaps the problem will go away immediately, since the reason was a bad signal coming to the TV.
• Then carefully inspect the signal processing board. In 90% of cases the problem is related to its functioning. Repairing this part requires some experience and knowledge in handling equipment.

IMPORTANT! If you are not confident in your abilities, then it is better to contact a specialist who will cope with the task in a few minutes.

• There is also one method that any user can do, even a beginner. To do this, you will have to disassemble the TV; on the back panel you will see two boards. Determine which one is causing the problem. After that You will need to stick a piece of electrical tape under the cable and move the part until the image becomes acceptable.

Thus, you can try to fix the split yourself, or you can call a specialist if you are afraid of messing up or breaking something. Once the problem is resolved, you can once again enjoy watching your favorite shows on your TV.