What is lnb satellite in on TV

Nowadays, satellite digital broadcasting is becoming increasingly popular. Modern TVs are distinguished by the presence of special modules and connectors that allow you to watch movies and programs in high quality.

What is lnb satellite in on TV

The firmware of the receivers used initially includes special keys that allow you to view television channels that are under special encoding. The TV does not have keys. It is impossible to enter key combinations or change the firmware.

Important! To watch TV using modern DVB-S2 technology, special CAM modules are used, into which cards from operators are inserted. The module is then inserted into a special PCMCIA connector. In this case, the satellite antenna must be connected to the LNB Satellite IN connector.

Why do you need LNB satellite in on your TV?

For satellite digital broadcasting, a DVB-S2 or DVB-S tuner is used. Models with a built-in satellite receiver easily find all channels available for viewing. The search is possible in manual or automatic mode. In most cases, a stable signal is received from at least four satellites. It is important to understand that just a built-in satellite receiver and an installed antenna will not be enough, because each television channel is encrypted and requires special decoding.

The standard in question has the following important characteristics:

• broadcasting programs in high definition;
• using an Internet connection to view additional content;
• providing access to viewing thematic programs;
• the ability to connect additional devices to the same network to distribute television content.

The transition to the modern DVB-S2 standard is due to the need to improve the quality and speed of digital information transmission.

How to use

The television antenna must be connected to a special connector of the existing equipment. Then they begin the setup process in the “Channels” tab in automatic mode. The signal source must be “Satellite”, after which the setup process continues.

Be sure to choose a satellite and set up the display. It is recommended to click on “Change satellite settings” and find the available channels. After that, click “Next” to search for programs installed on the equipment used.

Reference! In the window that appears, a window with various settings will be available. It is recommended to check the quality of the signal used and the displayed image. This determines how correctly the antenna is configured to receive satellite channels.

At the next stage, search parameters are determined. If the CAM module is missing, select the “Skip encrypted channels” option, because they are not available for broadcasting. To search, click “Run”.

After the channels have been found, you can sort the programs and make additional settings for high-quality image and sound. After this, you can fully enjoy watching television.