Which branch chipper is better: blade or milling?

Every gardener sooner or later faces the problem of waste disposal. Preventive and therapeutic treatments, as well as harvesting, regularly multiply compost pits and places where large branches accumulate. Chipper or garden shredder - the best acquisition that will make life easier for the owner of the farmstead. It is important to choose the right option.

Which garden shredder is better: blades or a router?

The main operating mechanism of the device is the engine. It transmits torque to the working tool, and these are knives or a cutter. Rotating, the cutting element of the shredder crushes the branches into a fine fraction.

Milling devices do not require a constant supply of waste, and knife tools require a special pusher, since they are not pulled into the container.

What is a knife chopper?

The first option is typical for budget household models. The cutting element here is represented by a disk with radially arranged sharp knives. They are made of tool steel and are very sharp.

Rotating quickly, they cut the fed waste into small fractions. The main advantages of the design are:

• ease of operation;
• low price;
• ease of maintenance.

At any time, the knives can be removed and taken for sharpening or replaced with new ones. However, they only cope with freshly cut branches no more than 2.5 cm thick and grass.In some cases, knives of a special configuration are used. The disk consists of several elements: the upper ones chop the stems, and the lower ones complete the grinding process into small chips.

The difference between a milling shredder

This mechanism is designed for recycling dried and large branches that household devices cannot handle. The torque shaft rotates the cutter - a special light-alloy disk with specially sharpened teeth. It spins at low speeds, literally biting into plant waste and crushing it into chips.

Such a mechanism may not “take” freshly cut branches.

Often, several cutters are used on one shaft at once with the knives running in a checkerboard pattern. In this case, grinding occurs much faster. A big advantage is that the branches are pulled inside the container. Grabbing the end of the stem, the mechanism sucks it inside and crushes it into chips in a matter of seconds.

If there are dried and freshly cut branches on the site, it is advisable to purchase a universal device. It consists of a cutter that is not covered with teeth, but is connected to several sharp knives. They are located at an angle to the longitudinal axis and easily cope with any type of waste. Their prices are higher.