Rating of submersible well pumps by reliability: which one to buy

creativecommons.org

Your own water supply system (in this case we are talking about a pump) is a “hot” product in stores. There is simply no other option for raising water without a centralized supply.

Why do we need a pump: so that water flows into the tap of our private home or cottage under the required pressure.

Most owners choose a device based on the advice of friends or their own instinct. As a result, the house has a device with high energy consumption and low pressure in the tank.

The article aims to help you choose the most reliable submersible pump. You will find out why this option is better than others, and get acquainted with the rating of well submersible pumps. Let's get started with the review!

Rating of well pumps: take surface or deep format

The choice should depend on the conditions of use of the equipment. For deep wells, it is rational to buy a submersible pump. For a small diameter and shallow place, the surface option is sufficient. Weigh the pros and cons of all models and then choose the best one.

What are the advantages of a deep (submersible) device:

• makes almost no noise - does not interfere with work in the house;
• Even an inexperienced user in this area can install it;
• pumps water from great depths;
• the body is specially designed so that no corrosion prevents it from fully serving in the home.

For a surface pump, one can also highlight advantages - ease of installation and maintenance. The big drawback is that the devices are not protected in any way from excess moisture. Installation of equipment is necessary only in a special place. This also affects the price - it is slightly lower than deep models.

Rating of the best submersible pumps - what to choose for a well

Before you buy one or another device from the rating of submersible well pumps, clearly monitor all the technical parameters of competitors, namely:

• motor strength;
• power of the entire system;
• dimensions of the well for sampling;
• pressure;
• how many fence locations will be served simultaneously.

Productivity - how much liquid you can pump in a period of time. Larger formats can easily accommodate 4-5 people. The optimal figure is 3 cubic meters. m of liquid per hour.

Power – the strength of the pump motor, the ability to pump water out of the well. A larger number is not always required to increase productivity.

The depth of the well especially affects the selection. If you have a well no more than 8 meters deep, then the surface option will suffice (return to the previous block), for deeper places - only a submersible device.

How to determine water pressure: measure the depth of the fence and add 30 m.

Consider also the number of places for liquid collection. The more there are, the stronger the pump should be in terms of water pressure. You don’t want to run into a problem when you turn off 2 faucets and there is no water?

Also pay attention to the length of the cord - it should optimally reach the outlet. It is better not to use extension cords - there is a high probability of a short circuit and fire in the wiring.

Rating of submersible pumps for wells

AQUARIUS 2300

creativecommons.org

A vibration pump from a Ukrainian manufacturer is popular not only in the country, but also abroad. Capable of working with both pure water and impurities. It is distinguished by its low cost and simple design.

The pump has a good performance indicator - 2300 liters per hour. Can support up to 3 feed points at a time. For a private home – just what the doctor ordered. The pump and housing are made of stainless steel and aluminum - no rust will attack such a unit. Engine power 330 W.

Advantages:

• Productivity allows you to pump water for both the home and the garden;
• The vibrating base works great in dirty environments;
• Extended service life due to stainless materials;
• The housing has seals to prevent any water from getting inside;
• The water pressure is enough for the pump to raise the stream to the second floor;
• A good security system at a low cost of the device.

"Sprut" 3S QGD 1-30-0.37

The pump from the Sprut company is one of the best pumps for wells; it can be installed both in open areas and in a home well. The diameter of the device is only 78 mm. In terms of productivity, it is slightly inferior to the previous one - 1800 liters per minute, but it is quite enough for a small dacha and simultaneous intake from 2 taps. The price is higher than the previous one, and here's why: a immersion depth of more than 15 meters and a pressure of 40 meters support the quality of this product. It is worth noting that the engine is more powerful – 450 W.

pros:

• Large loading depth – 15 meters;
• Non-return valve for emergency situations (to prevent water from going down without electricity);
• The body is your favorite stainless steel;
• A long cord - 10 meters is enough to reach any home outlet.

Vitals Aqua 5-4DCw 4535-1.0f

The Latvian company specially created a pump to work on wells and wells of equal power. Fits perfectly into any garden plot. The leader in productivity is 7680 liters per hour, but there is one caveat - the water must only be clean. If there is dirt up to 0.5 mm, it’s not a big deal. For better performance and long-term use, it is recommended to improve the filtration system. The immersion depth is 40 meters, while the pressure is 39 meters. The body is stainless steel, and the structural basis of the engine is brass. Automatic control turns off the device when the required liquid level in the tank is reached.

Advantages:

• Works simultaneously with 15 collection points;
• Powerful engine;
• Immerses up to 40 meters;
• Long cable – 15 meters;
• High-quality assembly and stainless materials.