How to connect a hose to a watering tap

Every gardener sooner or later faces the problem of connecting a watering hose to a water tap. If you simply put the tube on the faucet, it will immediately vomit as soon as the liquid is applied under pressure. Therefore, a systematic approach and additional means of connection are required.

How to connect a watering hose to a water tap?

Gardeners go to great lengths to carry out irrigation grown crops. They hold the sleeve in several hands, putting it on the tap and watering the area in this way. But it is much easier and more convenient to do this using connectors. They are sold at any water supply or hardware store.

The variety of taps and different configurations are perplexing, because adapters are also not universal. It is necessary to carefully select the connector so that the docking takes place correctly.

To dock, you will need to unscrew the faucet nozzle, insert the thread into the rubber hose and connect them to each other by twisting along the thread. Convenient and does not require additional effort or sophistication. However, you will have to spend some money to purchase the part.

If you need to connect the watering pipe immediately, but there is no connector at hand, there is a simple connection option made from scrap materials. To do this we need only three items:

• balloon;
• tape or tape;
• scissors.

First you need to cut off the wide part of the ball. Choose a strong and large ball so that there are no problems with breakthroughs during watering.We put the resulting “tube” of rubber product onto the hose, and pull the second part tightly onto the mixer.

Now you need to secure the structure with tape or tape. Moreover, it is necessary to wrap both the tap itself and the hose tightly so that a piece of the ball does not fly off as soon as the water pressure is applied.

Once you're done with your preparations, go out into the garden, put on the watering attachment and experiment. The sleeve behaves perfectly if the electrical tape is well secured. The only disadvantage of this method is that after watering it is necessary to unwind the structure and throw away the used materials. For convenience, it is still better to buy a connector that connects the mixer to the hose.