How to make a watering can with your own hands

Each plant requires close attention. Among the regular manipulations, watering is distinguished. If large bushes and strong vegetable plantings can withstand irrigation directly from a hose, then fragile flowers in flower beds do not accept such rough treatment. A convenient watering can is required, but not everyone has one at hand.

DIY garden watering can

Making your own means for watering plants allows you to save money and create tool, which will best satisfy human needs. There are simple designs. For example, from a plastic bottle. However, they look too simple and do not always correspond to the pomp of a garden plot with many fragrant plants.

Choose the option that best suits your environment. And if you need a watering can urgently, use the method of transforming a plastic container.

Watering can from a plastic bottle

It is extremely easy to make a sprinkler from ordinary containers. You will have to make several small holes in the lid with an awl and fill it with water. When you press on the body, the pressure will be adjusted and evenly irrigate the plants in the garden.

For an original product, we advise you to look for non-standard shaped containers in stores and decorate them to your own taste.Products made of dense plastic from detergents and powders are considered good preparations.

A comfortable handle will create additional comfort when watering plants.

From a glass

Even simple dishes can become the basis for making a homemade watering can. Processing a glass container is much more difficult, but this nuance pays off in its attractive appearance and long service life.

You will have to make holes here with a drill. The main thing is not to rush, because this can lead to cracking of the glass. And this is fraught with damage to the workpiece, which, after careless work, will go to the trash.

Watering can from a canister at home

Before transforming the container, you should thoroughly wash oily and flammable liquids from it. If this is not done, the plants may suffer. A long tube is formed from tin, which is attached to the hole in the canister.

We recommend preparing a detailed drawing that will help avoid errors during production.

Using a mallet, the curved edges of the sheet metal are attached to each other and inserted into the container. The second end is connected to the water supply hose. The connection must be airtight, so we stretch the tube as far as possible. We make holes in the canister, and the watering can is ready.

Homemade devices help to organize watering of some crops that do not tolerate a large stream of liquid hitting the leaves. This is an alternative to buying expensive devices that do not always meet the principles of quality garden tools.