How to remove the dispenser from the bottle?

A dispenser installed in glass bottles with alcoholic drinks allows you to accurately fill glasses and glasses without spilling and measure out the required amount of liquid. When the alcohol runs out, the container is usually thrown away. But some careful owners leave beautiful glass items for later use. For example, to fill a bottle with a homemade drink, you will have to remove the cap, and this can be done in several ways.

How to remove a dispenser from a vodka bottle

Some people have learned to pour liquid even through a narrow hole in the cork. But this is a delicate job that can result in alcohol spilling on the table. It is much more convenient to remove the plastic plug and pour in the contents without interference.

In some cases, if you carefully remove the element, you will be able to put it back in place and use it again.

Option with boiling water

If the cork protrudes above the neck of the bottle and you can grab it with your fingers, we recommend using a pan of boiling water. To do this, pour water into a container and put it on fire. We wait for the moment when it almost boils and lower the bottle, neck down, into the hot liquid.

In order for the plastic plug to soften under the influence of high temperatures, you need to hold the glass product in this position for some time. Then, without waiting for it to cool, the cork is quickly removed by grasping it with your fingers.You can first wrap it in a towel so as not to get burned and to hold on more comfortably.

It is noteworthy that this method makes it possible to use the dispenser again. After filling the bottle, it is inserted into place and used for its intended purpose. However, over time, when exposed to boiling water, it will lose its properties.

Using a hook

Imported bottles and some domestically produced drinks are equipped with dispensers installed deep in the neck. In this case, you can’t pick it up with your fingers—you’ll have to use another method:

1. Let's prepare a small, strong metal hook.
2. Fill the heating pad with hot water and wrap it around the neck of the container.
3. We hold the entire structure with a towel.
4. After five minutes, when the plug becomes softer from exposure to temperature, quickly hook it and remove it with force.

The method is simple to implement. But it will require some effort. It will most likely be possible to use the plug a second time.

Method with a knife

Another option, after which the dispenser is sent for scrap, as it is not suitable for further use. This usually happens with imported alcohol, where the plug sits so tightly that it becomes impossible to remove it without radical measures.

To do this, take a sharp knife and simply cut the lid inside the neck. Then you will have to remove the remaining cork and put it in the trash. It is no longer suitable for use.

Having a certain skill and a minimum number of tools makes it possible to quickly remove the dispenser from a vodka bottle. If there is no other option, simply cut the lid and remove the small parts.