How to make a rotating tray with your own hands
A turntable is a useful item in every kitchen. It is especially relevant in a large family, where a group of several people gathers around the table. A rotating plate or tray is placed in the center of the dining area. You can place various sauces, snacks, toppings or just flowers on it for an original decoration. At the same time, it is easy to make the device at home using available items.
The content of the article
DIY turntable
This type of decorative element is widespread in Chinese restaurants. They serve salads, various appetizers and sauces for main courses. This is very convenient, since those sitting at the table can turn the plate towards themselves and take what they need.
The tray has the name "Lazy Susan". However, it is not yet possible to establish its origin.
Necessary materials
It is not difficult to construct a rotating device with your own hands. You will need a minimum set of tools, ingenuity and a little time coupled with diligence. To work you need:
- round board;
- stain, varnish or paint;
- screws and other types of fasteners;
- drill;
- Sander;
- sandpaper;
- hammer;
- ruler;
- pencil;
- screwdriver;
- brush.
As a turning mechanism, you can use a special rotating block or, for example, a spinner.
Step-by-step instruction
The sequence of work directly depends on the result that a person wants to get.If there is a simple stand without decorative elements, we perform the following manipulations.
- Preparing the base. To do this, take a tray. You can disassemble an old wooden chair by taking its seat as the main part of the future device.
- Cleaning up. Using a sander, remove the top layer of wood. We completely process the workpiece from all sides.
- Paint coating. Next, we use the appropriate composition to transform the base. Apply with a brush in several layers. At the same stage, decorative inscriptions or drawings are made.
- Bottom markings. Using a ruler and pencil, measure the center of the structure and make notes where the rotating mechanism will be placed.
- Secure the rotating element exactly in the middle of the structure so that the tray does not fall over during use.
- Installation of the cover. A circle of cork board will do.
At this point the device is ready. You can also attach oven mitts, but this is not necessary.
Options for making a rotating table from improvised materials
If you don’t have a turning mechanism at hand, and you don’t want to go to the store to get one, you can use items not related to repairs. One of the options would be a spinner, popular among teenagers. By attaching the newfangled gadget to the central part of the tray from below, you will get the desired result.
A complex but entertaining option is using large beads. Using liquid silicone or glue, mark the stops on the bottom of the tray. Then the beads are placed there and covered with an overlay. The rotation will occur due to the movement of large beads.
It is much easier and faster to buy a rotary mechanism. It is sold in every store for decoration and repair. The cost is affordable.The process of creating the device will be easy and enjoyable.
