Floor tiles in the hallway: photo

The hallway serves as a link between the street and the apartment. Therefore, she has to take on the influence of a number of factors:

• meteorological - temperature and humidity;
• mechanical, caused by shoes;
• chemical due to aggressive substances that are used when cleaning outdoor areas in winter.

As a result, the flooring in the hallway can quickly wear out, crack, and lose its appearance and attractiveness. The most optimal solution in this situation is to use tiles, which in terms of strength characteristics are superior to all other types of coatings and have a wide range of sizes, colors and different design solutions.

Which tile looks better on the hallway floor?

When choosing a tile, you need to pay attention to its resistance to moisture and chemicals, wear resistance and strength to loads, lack of risk of injury due to a too smooth surface, and compliance with the interior of the room. When tiling the floor, different types of tile products are used.
The traditional and most commonly used is ceramic tiles, which are produced by firing clay.

This makes it resistant to wear, temperature changes and durable. A wide palette of colors allows you to implement any design solutions.
Porcelain tiles belong to the class of tiles with increased strength.

This is achieved by using rock chips in high-quality clay. According to other characteristics, it is close to ceramics. The cost of porcelain tiles is higher than that of ceramic products. Quartz vinyl tiles are created on the basis of quartz sand, which provides strength and resistance to moisture and temperature.

To make the product flexible and plastic, making it easier to install, stabilizers and plasticizers are added to the composition, and pigments are added to obtain different color solutions.

Each of the considered types can be used when laying in the hallway. There is no clear answer to the question of which tile covering will look best, because it depends on its size, color and pattern, installation method and how it harmonizes with the interior of the room.

Examples of different tile layouts in the hallway

There are different ways to lay flooring in a hallway. The simplest and most frequently used is laying in rows, in which the elements are installed next to each other. The rows should be even and straight. This is the fastest way. The use of large tile products allows you to visually increase the floor area.

It is possible to lay it at an angle to the wall, when the original covering element turns from a square into a diamond. The floor in this case will look much more interesting. But to implement this method, it is necessary to trim a significant number of tiles, which increases its labor intensity and leads to the generation of a large amount of waste.

If elements in rows are installed offset, the resulting pattern will resemble brickwork.In this case, you can use tile coverings of both square and rectangular shapes.

Rectangular products can be used to imitate parquet flooring. To do this, the tiles are laid in a herringbone manner. If the first element is laid parallel to the wall, then the resulting pattern will be located diagonally in the room and multiple cutting of tile products will not be required. When choosing a material for this method, you should not use tiles that imitate natural stone, as it will look awkward. The sizes of the elements can be large or small, as well as different colors. The alternation of colors can be strict or chaotic.

The modular method involves the use of products of different sizes. For example, large tiles are installed offset, and the free space is filled with smaller elements. Implementation requires good preparation and experience.

A large assortment of tile products with different colors and patterns, various decorative inserts allow you to implement the carpet method in the process of floor covering. Its essence is that a drawing is first created from elements available in catalogs, which is then implemented. The method of installing tile elements in this case depends on the developed sketch.

Choosing the color scheme of tiles for the interior

There are so many color options for tile products offered today (look at the photo) that choosing a specific one is not an easy task. Therefore, it is necessary to take into account some basic principles first.

Light colors such as white, beige and walnut help to visually increase the area, but, on the other hand, are very easily soiled.All street dirt from shoes enters the hallway and will be constantly visible against the light background of the coating. This problem cannot be solved by choosing dark tones that do not hide traces of dirt and scratches.

In addition, they hide space and are not used in small areas. The most preferable are coverings in muted tones, and the presence of a pattern or patterned surface on them will make the hallway design more attractive.

When choosing and installing tiles in the hallway, various factors need to be taken into account. The information in this article focuses on the main points of this process and promotes correct decision-making.