How to remove primer from linoleum

After renovation work, you often have to think about cleaning the floor covering. Sometimes stains and primer residues appear on the linoleum. This building material is difficult to remove from the surface, which can significantly spoil the appearance of the coating. For reliable results, you should use several proven methods.

Why is it difficult to remove primer from linoleum?

Carrying out repairs without leaving any contamination is very problematic. Dust, shavings, and remnants of construction materials create additional difficulties when cleaning the workspace. The primer has a wide range of positive qualities, which is why it is widely used.

The disadvantage of this building material is that it is very difficult to get rid of its remains when the space is contaminated. This is due to the characteristics of the substance. When drying, moisture evaporates, which leads to polymerization of the suspension. Due to the disappearance of the liquid, the structure of the primer changes, it hardens and becomes practically insoluble under the influence of ordinary water.

The best option is to eliminate building material residues immediately after contact with linoleum.To do this you will need warm water and a soft sponge. However, small areas may be missed or not noticed. The primer is characterized by fast drying: the material hardens within half an hour. In order to remove dirt from the floor covering, several options are suitable.

ATTENTION! To avoid possible contamination of the floor covering, it is recommended to cover the linoleum with film. Masking tape is useful to protect joints and corners.

How and with what to wash primer from linoleum

There are several simple, effective and safe ways to clean flooring from dirt.

Mechanical methods

When cleaning using mechanical action, you should be careful and be careful in your movements. Failure to do so may result in personal injury or damage to the coating.

Options:

1. To work, you will need a solvent and a spatula. The dried layer is filled with solvent and left for some time. The softened contamination is carefully removed with a spatula. A certain angle (no more than 40 degrees) and caution should be observed. This will help avoid damage to the linoleum.
2. An abrasive sponge (with fine grain) is also suitable for removal. Place a soft cloth soaked in warm water on the stain and leave it for several hours. The wet stain is removed with a sponge. You can use a damp sponge to remove residue.

ATTENTION! All work should be carried out with rubber gloves to provide additional protection for the skin of your hands.

Chemicals

A chemical agent is also suitable for cleaning.The choice and washing process must be approached with caution: if selected incorrectly, the structure of linoleum can be destroyed and the coating may be damaged. When purchasing, you should pay attention to the composition. A product that does not contain soda or alkali is suitable for cleaning.

Solvents "White spirit" and "646" are the best option. In order to get rid of the remnants of the dried suspension, you should apply the cleaning agent to a cotton pad and wipe the surface. Repeat the procedure until completely cleansed.

Work with chemicals should be carried out in a well-ventilated area. For additional protection, a respirator and rubber gloves are useful.

IMPORTANT! Before starting cleaning, it is recommended to test the product on a small area of ​​linoleum.

Traditional methods

This list of options is the most practical and safe for health. The substances used in the work can be found in every home, which greatly facilitates the process.

To clean a small area, nail polish remover, which is found in any women's cosmetic bag, is suitable. The composition is applied to a soft cloth, the stain is thoroughly wiped until completely dissolved. When finished, the floor should be wiped with a damp sponge dipped in soapy water.

A more complex method involves cleaning with a solution consisting of water and acetone. Ingredients are taken at a ratio of 1:3. For work, material with a hard, dense texture is used. After cleaning, the coating must be washed with clean water.

A large amount of dust and remains of building materials on the surface of the floor and walls are familiar to anyone who has carried out repairs. Many components are highly dense, which makes them difficult to remove.This includes primers. By adopting a few simple methods, you can clean linoleum from such a substance in a short time.