How to protect laminate flooring from water

The basis of modern laminate flooring is wood. It is created by connecting several layers, covered with a laminated film on top. It is laid on the floor both in private homes and in administrative buildings. It is easy to care for, but you should keep in mind that exposure to steam and moisture can cause it to deform. Therefore, laminate is not used for flooring in bathrooms and bathrooms.

How to protect laminate flooring from moisture

In fact, there is no need to re-cover such a coating if some amount of moisture gets in. The laminate can be protected from its effects. Manufacturers offer additional impregnation to reduce the negative impact of moisture on this coating.

To do this, you can use special impregnations that protect against moisture penetration. They are made on the basis of wax or other hermetic material. They are applied to joints and locking joints. Application should be carried out from the reverse side of the lamellas. Excess product must be removed immediately.

There is a large selection of impregnations in the retail chain, but the most convenient are wax-based impregnations. They are easily applied to joints with a brush or foam sponge. If applied carelessly, excess impregnation can be easily wiped off with a dry cloth.

Wax impregnation will also protect against squeaking when using the floor covering.Locking coverings can also be treated with special mastic to improve fastening. This saves them from moisture and dust getting into them. It is especially good to use this method of water protection in the kitchen.

Remember! Since waterproofing materials have a strong odor, after working with impregnation, be sure to ventilate the room for several hours.

Other methods of protection against water

Other methods of protecting laminate flooring from moisture are also used. You can use a special protective film glued to the surface. It is simply attached and absolutely safe for health. Certain types of laminate are already treated at the manufacturing stage with special means to protect them from moisture. After this, he is practically not affected by it.

You should also be careful to ensure that when laying laminate flooring, the floor is completely dry. A damp surface will lead to rapid deformation. It is recommended to place a moisture-proof film underneath before installation. Dampness that spreads from the basement will negatively affect the laminate.

Various sealing products that are made on the basis of silicone are characterized positively. If the laminate was treated with moisture protection agents during production, there is no need to reapply them.

Remember! If the manufacturer indicates that the laminate has been treated with paraffin or mastic, then no additional impregnation will be required.

How to protect laminate joints from water

In the area of ​​board joints, swelling of the top layer sometimes occurs. This may be a consequence of poor quality locks, due to incorrectly selected thickness of the substrate, as well as due to improper operation.One way to prevent this from happening is to treat all joints and joints with impregnations and compounds with water-repellent properties. Treatment agents can be used to lubricate the lamellas and also apply them to the joints.

For additional protection of the laminate, its parts are coated with special glue when joining. Since it dries quickly, you only have to lubricate one board and immediately insert it into the grooves.

Treatment products can be either matte or glossy. Therefore, if a matte product was used on a glossy surface, this may lead to the surface being covered with streaks and having an unaesthetic appearance.