How to connect carpet together

Carpet.In the case of repairs and replacement of flooring in the house, you need to think through all the nuances and choose a really good option. If you decide to purchase carpet, you need to know how to lay it correctly and connect it together to create a flat floor.

In order for the carpet to last longer and not create inconvenience, it is very important to correctly fulfill all the conditions. However, few people know how to join the coating without visible seams. In this article we will try to analyze the most popular methods and help you create the perfect floor in your home or apartment.

Necessary tools for working with carpet

First you need to decide on the necessary tools. For work we will need:

  1. Electric jigsaw.
  2. Hammer.
  3. A shoe knife or a sharper stationery knife with replaceable blades.
  4. Hacksaw for metal.
  5. Set of measuring tools.
  6. Pencil or marker for marks.
  7. Plus screwdrivers (phillips).
  8. Rule.

This set is relevant for any of the possible carpet joining methods described below. If necessary, you can use additional means of your choice for convenience.

IMPORTANT! Do the work carefully so as not to damage the material.It's better to take it with a reserve.

Options for connecting carpet to each other

After preparing everything you need, select one of the proposed options. There are several ways to do this, some of them are presented below:

  1. Overlapping connection. A fairly simple method to implement.
  2. Use of a special strip in the design. This method will be relevant for interior transitions, since the junction will stick out slightly.
  3. Working with a special iron to join the edges of the coating.

Options for connecting carpet parts.

Even if you were able to accurately calculate the required carpet footage for each room, it is still recommended to make connections. This will ensure high-quality coverage and extend service life, since without joining, the material can bend and deteriorate over time from frequent mechanical damage.

How to overlap a carpet joint

The first method involves creating a special layer of material on top of each other, so you should purchase it in reserve.

  1. Place the edges of the carpet on top of each other, forming an overlap of approximately 8–10 cm.
  2. Place a strip of cardboard underneath it.
  3. Using a knife, make a longitudinal cut (angle of inclination approximately 40°).
  4. Glue the coating with special tape on both sides.

Carpet connection.

ATTENTION! If there is a pattern on the carpet, try to fit it so that it will remain after cutting. This method is best used in places that usually do not attract attention (behind a closet, sofa, in the corner of the room).

How to connect parts of the covering with planks

The following method is suitable for connecting the coating in doorways. It will create an outline and perfectly divide the space:

  1. Take measurements of the length of the plank.
  2. Cut the piece to the required length.
  3. Make both joining edges even.
  4. Press the material tightly to the floor and lay the strip on top.
  5. Make special holes in the floor for future fastening.
  6. Secure the bar with fasteners.

Connecting carpet using strips.

IMPORTANT! Of all the models, it is more convenient to use a bar with the smallest protrusion for a convenient position. Too large elevations will interfere.

How to glue carpet pieces

The use of adhesives should be resorted to after careful consideration and evaluation of the underlying coating. If the coating is replaced or completely removed, the adhesive may leave marks and deform the floor surface. If you decide to use this particular option, follow the instructions.

To begin, apply glue to the base covering and to the edges of the carpet approximately 5 cm in both directions. Then press the material tightly and fix it until it dries completely. In this case, use a dry cloth to remove excess glue that will appear in the gaps. If necessary, you can periodically update the adhesive base to improve fixation.

How to glue carpet pieces.

 

Using a special iron

One of the better methods of fastening is an iron. It allows the product to fit tightly without creating gaps:

  1. Trim the edges of the carpet in the same manner as described above.
  2. Apply a special compound that ensures adhesion.
  3. Apply 7 cm wide tape to the joint.
  4. Apply the coating and wait for it to dry. Drying is done with hot air from an iron.
  5. Comb the lint to remove any visible part of the cut, ensuring a tight bond.

Joining carpet using an iron.

IMPORTANT! Do not wait for the base to dry; all actions should be performed quickly before the composition begins to harden.

What determines the choice of docking option?

If you are in doubt about choosing a joining method, you should pay attention to the following factors that play an important role in joining the coating:

  • choosing a docking location;
  • levelness of the floor and the presence of protrusions or small roughnesses;
  • the strength of the floor and its susceptibility to deformation;
  • the quality of the base material from which the carpet is made;
  • cost of the method;
  • availability of time, ability to use complex methods.

Analyze all the points and choose the most suitable one for your apartment. The coating should look nice and create a visual effect of integrity.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers