How to properly lay carpet on linoleum

Carpet has long been popular due to its high level of comfort and practicality. A significant advantage is that even a beginner can install it. To install it, you don’t even have to dismantle the old coating, but simply lay a new layer. For example, it can be laid on old linoleum. This is what we will talk about today.

Is it possible to put carpet on linoleum?

The first thing you need to pay attention to is the condition of the linoleum. For example, if a person starts renting a room, but doesn’t like the flooring, then you can simply lay a beautiful carpet on top of the old linoleum or laminate.

If the linoleum is laid on a pre-leveled surface, well glued, and there are no blisters or waves on it, then the carpet will lie on it flawlessly. This floor will be much warmer and more comfortable. The advantage is that you can even save money on the substrate.

If the linoleum is not in the best condition, then it needs to be replaced. After this, level the floor, and then lay a new floor covering. Due to this, it is possible to evaluate the subfloor.Old linoleum may have scratches, blisters, dents and other surfaces that impair the quality of installation of the new floor covering. After this, all the irregularities will also appear on the new foundation, and the appearance will not be flawless. This means that linoleum needs to be at least leveled and sanded.

What you need to prepare

In order to begin installation, you need to stock up on the following tools:

• knife;
• scissors;
• roulette;
• double sided tape;
• adhesive substance;
• roller

Laying rules

For started required determine the type, structure and direction of the pile. It is very important to pay attention to the incident light and the presence of the pattern. When assessing, the pile should be in one direction and if there is a pattern, it should match.

Installation requirements:

1. To prevent waves from appearing, use glue.
2. In addition, due to increased humidity in the room, tubercles may appear.
3. Pay attention to how the seams are laid.
4. The pattern must match both the width of the floor covering and the length.
5. Fix any uneven spots instantly to ensure your carpet lasts for a long time.
6. It is necessary to install natural pile carpet very carefully, because it is afraid of adhesive pigments getting into the piles.

How to properly lay carpet on linoleum

Laying technologies

Several methods can be used for installation:

• fastening using glue;
• free laying around the perimeter;
• tension method;
• installation using double-sided tape.

Preparing the surface

First you need to assess the condition of the floor on which the linoleum lies. If there are a large number of bumps, irregularities, cracks, and swellings on it, then it will need to be replaced.The floor for carpet installation must be strong, reliable, without cracks or other noticeable damage. This is very important, because in this case linoleum acts as a substrate.

NOTE. Often, carpet is installed using glue, so the surface should in no case be greasy or other contaminants.

The best option for installing carpet is to lay it in one piece, rather than joining it together from many parts. To do this, you need to correctly measure the amount of material needed:

• consider the geometry of the room;
• if the room is too large, you can make custom carpet;
• pay attention to all the irregularities and make allowance for the plinth;
• purchase at least 10% more material.

Before you begin installing carpet, you must prepare all the necessary tools.

ATTENTION. Immediately after purchase, the carpet should be left in the room so that the fabric can undergo the process of adaptation to the temperature regime.

Fixation methods

Fixation with glue

This method is used for large rooms and rooms where there is a lot of traffic. It consists in the fact that the glue is distributed in an even layer over the surface of the old floor covering and the new material. A significant advantage of this installation method is that lumps and swellings are practically not formed. Today we will tell you how to lay carpet on linoleum without a backing.

Sequence of work:

1. Rinse the floor thoroughly to remove grease stains and other contaminants.
2. Apply adhesive evenly to the old floor surface.
3. If necessary, add a layer.
4. Leave for a while so that the material has time to stick, then spread the product on the floor.
5. Then apply glue from the wrong side.
6. The material is placed on the linoleum and pressed tightly.
7. After this, he begins to glue the carpet on the other side.
8. Then we begin to trim off the excess pieces.
9. We adjust the material to the baseboards.
10. The final stage is the installation of the plinth.

A significant advantage of this method is the reliability of fastening and the ability to lay the material in parts. Bubbles and swelling are excluded in this case. The disadvantages include the fact that the work is quite complicated and not every beginner will be able to complete it, and that it will not be possible to reuse such a coating.

Free fixation

This method is budget-friendly, because you can significantly save on glue, tape and other installation elements. But in this case, there is a high probability of bubbles and swelling, which significantly reduces the service life of such a floor.

Sequence of work:

1. Linoleum is washed and dried to remove dirt.
2. After this, the substrate is placed.
3. The product is rolled out on the floor.
4. One of the sides is adjusted to the baseboard.

When installing carpet using tape, you must use a level. Suitable tape for this purpose is from 60 mm. First, it is glued along the entire perimeter, and only then we begin to paste over the grille. You need to lay the carpet with a small margin. The protective paper from the tape is removed during the process of gluing the material to the floor. After this, we cut off the excess material near the wall. In this way, you can install the carpet in parts. A good way to lay carpet on linoleum or chipboard.