How to treat carpet edges at home

Carpet is popular due to its softness and attractive appearance. It is sold in roll form and certain rules must be followed when placing it on the floor. One of the features is the need to process the edges of the carpet. It is recommended to learn how to correctly perform the procedure yourself at home and why it is required.

How to finish the edges with your own hands?

Often this process is performed using a special overlocker. But if you can’t use it, you can arm yourself with a simple needle and carry out the processing yourself. A loop stitch is required. The edge of the product should be trimmed so that it becomes smooth and does not become shiny. Additionally, you will need several spools of thread.

Reference! The threads must have good strength and quality. Therefore, it is recommended to choose synthetic threads.

An important step is choosing a shade. It can match the carpet palette or become a contrasting element. The needle should be sharp, thin, but large. The edges are finished using a regular loop stitch. The edges must not be folded, they must remain straight.

If you want to add tenderness and volume to the product visually, then replace the threads with a thin cord. The edges will become stronger. The distance between stitches is chosen independently.They can alternate or be at the same distance.

Another processing option is to use tape. It should be synthetic, thin and match the color scheme of the carpet. You can use satin braid for additional decoration.

If the aesthetic side of the issue is not of much concern to the owners of the product, it is worth using available materials:

1. Lighter or matches. The edges need to be scorched. You should proceed with caution. If you overdo it with scorching, the carpet will lose its attractive appearance;
2. PVA glue. It must be transparent. This option is suitable for products with large pile. This way traces of glue will not be visible on the surface.

You can simply cover it with a plinth. The method can be used provided the product is placed right up to the walls. The carpet is spread in the desired room and all excess is cut off. Then the carpet is installed. The latter can be ordinary or specifically for carpet. In the first case, the product is simply tucked under it. In the second case, it is necessary to cut off a piece from the product commensurate with the dimensions of the plinth and glue it to it.

The set of necessary elements depends on the chosen processing method. Materials needed may include:

1. A needle of a suitable size;
2. Threads, high quality and strong;
3. Satin ribbon;
4. Lace of a suitable shade;
5. Transparent glue;
6. Matches or lighter;
7. Skirting board.

Additionally, scissors may be required to trim the edges of the product.

Why do you need to treat the edges of the carpet?

Edge treatment is a mandatory procedure to increase the life of the carpet. This procedure helps protect against lint loss in the future.The treatment strengthens the fibers and helps them adhere to the canvas. Additionally, the procedure emphasizes the shape of the product.

The process does not take much time and can be done at home with your own hands. Therefore, for a long service life of the product, its edges should be treated using a suitable method.