How to remove a mirror from a closet door

Every person may have a situation when they get tired of old things, but they don’t want to say goodbye to some element in the design. This can happen with the example of a mirror. Let's say the old cabinet is no longer needed, but then how to remove the product from it? This process and its features will be discussed in this article.

Is it possible to remove a mirror from a cabinet door yourself?

Of course, this is quite possible to do. You will not need a lot of effort, since usually difficulties do not appear in the case. You just need to know the items that will be needed for removal. And the entire algorithm will be provided below.

What tools will you need?

To work, you only need to have three items available: a large screwdriver, tape and a chisel.

Possible methods of dismantling

There are three options for the outcome of events that can be carried out even at home. Let's look at each of them.

First:

1. For the first task, you need to first sharpen a metal ruler so that its narrow edge is as sharp as possible.
2. This section of the product should be carefully inserted into the gap between the glass and the surface.
3. To gradually and constantly deepen the ruler, it is advisable to tap the edge. This will take you to the other edge of the mirror.

Second:

1. First, it is recommended to cover the outer part of the structure with a special film or tape. This is necessary in order to prevent the occurrence of a large number of fragments.
2. Next, take a cutting wire, which can be purchased at any auto parts store, and run it behind the extreme corner of the mirror. At this point, the main thing is to move it smoothly. It is worth remembering that you need to hold the product by pressing it to the surface.
3. Once the glue has been cut through, you can carefully remove the unit.

Third:

1. Take a saw and cut out the part of the drywall where the mirror is located.
2. Next, fill it with water and leave it to get wet.
3. After the surface gradually dissolves, you can use wire to eliminate its remnants.
4. The final stage is drying the product.

As you understand, there is nothing complicated about this. The main thing is to choose the best method based on what your mirror is mounted on.

How to Remove a Mirror from a Closet Door: Step-by-Step Guide

The most common case is defined as the removal of a part from a furniture accessory. All that is needed is indicated above in the article. So let's get straight to the simple steps:

• As in the previous method, you need to cover the front side with tape to fix the position.
• Next, without applying much effort, you should place a small part of the screwdriver under the edge.
• At the end of the process, it is worth eliminating the particles that remain from the glue and getting rid of contaminants.

Safety rules at work

It is clear that all the manipulations performed are not safe.Therefore, in order to ensure your protection, you need to observe or at least adhere to the following points:

• The clothing you will be wearing should completely cover all parts of your body so that your skin is protected as much as possible.

ATTENTION! This is required so that if the mirror breaks, the fragments cannot harm you.

• It is important to keep children away from the origin of the process.
• Frauds need to be carried out outdoors so that the area is not closed and isolated.
• However, it may be that it is not possible to fulfill the previous point. In such a situation, a general cleaning should be carried out after completion of the work.
• After the procedure, you should also check yourself to see if there are any splinters on the skin.

Tips on how to easily and safely remove a mirror from a cabinet door

Of course, if you adhere to the rules and instructions described above, then the whole process will go through without any difficulties. However, you should also consider tips that will certainly make this work easier.

• When cutting drywall, it is advisable to make the edges even. This will make your future work much easier when you restore the surface or make repairs.
• When you cut through the glue, you should hold the mirror. You can even call another person to help you perform this function.
• To eliminate residues that are located at the site of the removed product, it is recommended to use a solvent. He will do an excellent job with this task. It is better to use this method in cases where further interaction with the element is planned.
• Remember that during the dismantling process all actions must be smooth and proceed carefully. Sudden movement is prohibited.
• When using the ruler, it is not recommended to raise it high, otherwise the mirror may break.

Now removing the mirror from the cabinet door will not be difficult for you.