How to choose a computer chair

The main feature of a computer chair is the installation of a mechanism for adjusting the tilt and height of the seat. Due to its significant weight, the chair most often has wheels for moving around the office or apartment.

How to choose a computer chair

The main criterion is the time spent at the monitor, as well as the ability to replace the user:

1. Up to 2 hours. This mode involves using the computer outside of work hours: viewing email, news, communicating on social networks. A chair made of cheap materials, equipped with a small number of adjustments, is quite suitable for this. The cost of this chair is the lowest.
2. 3-5 hours a day. This mode is comparable to working at a computer. The chair must have adjustable seat height and tilt, and installation of armrests. The cost of these chairs is in the middle price category.
3. More than 5 hours daily. This means that the user is tied to the computer chair as if it were a workstation. In this case, there is no point in saving. You can take a closer look at chairs equipped with a design for synchronously changing the position of the chair, taking into account the busy posture. The mechanism is adjusted to the user's body weight. These chairs are the most expensive.

Seat height

The chair must have a not very hard seat.A product with a soft seat will lead to stooping and various pathologies of the pelvic organs. On a hard seat you have to constantly change your body position, this improves blood circulation in the pelvic area. But it is quite difficult to spend a long time on a hard chair.

Attention! The height of the seat must be set taking into account the height of the shin. The required height is such that your feet are on the floor. Moreover, the knees were located at right angles.

What should the back be like?

For a comfortable position, the backrest must have an anatomical shape. If it is smooth, then you can use an orthopedic pillow. Features of choice:

1. It is best to choose a low back (±50 cm), and support only with the help of the lower part of the spine.
2. If you need to sit for a long time during the day and require additional support in the shoulder area, you can take a closer look at a chair with a high backrest of ±70 cm.
3. If you need to relax your neck area when sitting for a long time, buy a chair with a headrest.

Design

The design of the computer chair must have a five-beam support, as well as adjustment mechanisms that can be reached without rising from the seat.

Attention! A frame-shaped structure with a bolster under the lower back is required. The bottom of the seat should be round in shape so that the blood arteries under the knees are not pinched.

Sheathing

Any material used for upholstering chairs has its pros and cons:

1. Leatherette and eco-leather. Leather substitute is more brittle. During the production of eco-leather, no plasticizers are used. The base is made of cotton fabric, which does not emit toxic substances during operation, being absolutely safe.The main advantage is ease of maintenance.
2. Genuine leather is more pleasant to the touch and has a longer service life, but the cost of this material is quite expensive.
3. Fabric is the most comfortable material, regardless of the room temperature. The fabric is breathable, but it will require careful care.

Practical and convenient additions

When choosing a chair, you can additionally select various amenities:

1. Synchro mechanism. At the same time, the chair synchronously responds to all movements of the owner, if he wants to move sideways, backwards or forwards. Synchronization makes it possible to move simultaneously with the backrest.
2. Separate removable headrests are more of a decorative element. The situation is completely different with chairs with a high back, on which you can lie down at full height.
3. Sometimes the backrests have an angle of less than 90 degrees. This is not a factory defect. This design moves forward simultaneously with the body, reducing the load on the spine.

The best computer chairs

The most popular computer chairs are products of Italian and German assembly. Also today there is an influx of Chinese products that are not of high quality:

1. German chairs are characterized by comfort and safety. The wheels of these chairs have brake devices that, if necessary, block rotation. The products have a thick layer of filler, which ensures comfort while sitting.
2. Italian chairs are not inferior in quality to German ones. At the same time, they are significantly superior in design solutions.

To ensure that time at the computer at home is not overshadowed by discomfort, create all the conditions for work. The most important thing is to choose the right computer chair in which you can sit for a long time without feeling tired.