DIY table made from furniture board

Furniture created with your own hands is not only an exclusive thing. This is also a testament to the skill of the owner of the house. With a small amount of knowledge and a basic set of tools, you can easily make a table that best suits the size and design requirements. The best material for this would be furniture board. The wood used in its production has such positive qualities as optimal humidity for humans and environmental friendliness. The simplicity of working with the shield will make it easy to turn it into an exclusive and convenient piece of furniture.

Tools and materials for a table made of furniture board

Before starting work, you need to take care of the tools and materials. Considering the simplicity of processing furniture panels, complex and expensive equipment is not required.

Tools that will be needed during the work process:

1. Jigsaw, hand or circular saw. Will be needed for cutting boards and timber. Since wood is a fibrous material, it is advisable to have a tool with fine teeth.
2. Sander or sandpaper. For processing the surface and edges of the board. Making a product look beautiful is not the least important task. Especially if it is not for a garage or workshop, but for a home.
3. Drill, screwdriver. For attaching legs and stiffening bars.
4. Measuring tool. Ruler, tape measure, square.As the saying goes: “Measure twice, cut once.”
5. Wrench for socket nuts.

For a simple model you won't need a lot of materials. To make the table you will need:

1. Furniture board. The size of the part is 60 cm by 160 cm. These are optional dimensions, you can choose them to suit your room.
2. Beam. Used to add rigidity to the structure. 4 by 4 centimeters will do. If the tabletop is large, then it is better to take a thicker one. The length of the beam in our case is 440 cm.
3. Varnish, paint. To give a better appearance to the product.
4. Iron legs – 4 pieces.
5. Screw nuts, self-tapping screws. These parts will hold the structure together.

REFERENCE! All the necessary materials can be easily found in a furniture store. This will not require much expense, and the table will stand and delight the owner for many years.

Making a table from furniture board with your own hands

Having prepared all the necessary materials and tools, you can begin to work. Making a table from furniture board is quite simple and there shouldn’t be any problems.

Once everything you need is conveniently located in the workshop, it’s time to start:

1. Cut out the table top. First you need to measure the required length and width and draw a cutting line. Afterwards, carefully and slowly cut the wood with a saw or jigsaw.
2. We prepare the timber. You need to cut it into 4 parts, 2 along the length and 2 across the width of the tabletop. Cut a 45 degree angle along the edges of the timber. If you have a miter box, good; if you don’t have one, you’ll have to use a protractor.
3. We screw the beam with self-tapping screws. To do this, you need to place it along the edges of the tabletop so that the cut corners meet. Then drill holes for the screws and secure the parts.The timber will not only give a better look to the table, but will also make it stronger.
4. We screw in the nuts where the legs are installed. First we drill holes for them, then screw them in using a wrench.
5. We attach the legs to the previously screwed in screws.
6. Sand with sandpaper or a grinder. The product needs to be sanded well. First with coarse paper, then with fine-grained paper.
7. We cover the table with varnish. For a better appearance, it is advisable to process at least 2 times.
8. We wait for the varnish to dry. The furniture board table is ready.

Making such a table will not take much time and money. Having spent very little effort, you will receive a high-quality and beautiful piece of furniture that will take its place in the house for a long time.