DIY wardrobe

Ordinary cabinet furniture occupies from 40 to 60% of the entire usable area of ​​the apartment. This probably served as the basis for the widespread popularity of wardrobes similar to walk-in closets. In addition to saving space, they provide the homeowner with additional volume; the useful volume of such a cabinet is two and a half times greater than that of an ordinary cabinet with hinged doors. This is achieved primarily due to the fact that the design of this product uses swing doors, which do not require additional free space and, accordingly, save the availability of free space in the room.

Making a sliding wardrobe with your own hands

We suggest making this furniture with your own hands. But first, it’s worth familiarizing yourself with the preparatory work.

What tools will you need?

To make this type of furniture yourself, you will need the following tools:

• electronic or mechanical roulette;
• building level;
• electric jigsaw;
• screwdriver;
• electric drill;
• wood drills;
• hammer.

In addition to the listed tools, you will need to purchase:

• self-tapping screws complete with dowels;
• guides to ensure the movement of compartment doors;
• construction tape (double-sided tape);
• wipes soaked in alcohol, they will be needed to degrease the surface of parts;
• components for guides;
• corners, rod holders;
• racks - hangers.

How to choose a good material for making a wardrobe

Most often, for the independent production of furniture, including coupes, a material such as chipboard is used.. This material is characterized by low cost, sufficient strength and ease of processing. Chipboard manufacturers offer a wide selection of colors, patterns, etc. This allows you to implement the most interesting design solutions. But unlike many other materials, chipboard does not lend itself well to fine processing. This serves because chipboard is more often used for the manufacture of relatively simple structures.

For this reason, mostly simple structures are made from chipboard or laminated chipboard.

Important! The optimal solution would be to use moisture-resistant chipboard covered with laminate.

What knowledge is needed to make a wardrobe

To carry out work on the independent production of furniture of this type, you need to know:

• how you can draw a sketch and, of course, understand how to correctly measure the room in which it will be installed;
• In addition, knowledge of wood processing and skills in installing components in place are required;
• Of course, a person who decides to make a coupe himself must be able to work with electric tools.

Wardrobe options

There are two large groups of products, built-in and cabinet-mounted. Built-in ones are installed between walls, cabinet ones are installed in a pre-prepared place.

In practice, coupe models are most often used:

• two-door;
• three-door;
• corner.

When choosing a model, it is advisable to be guided by the tasks that must be solved. If it is used to store outerwear, you will need to use one model; if you use it to store bed linen, you will need to use a different design.

How to build a drawing of a wardrobe with your own hands

After preparing the tools, choosing the material for manufacturing and the type of cabinet, it is necessary to draw a drawing. Without this component, it will not be possible to build good furniture.

We take measurements of the space for the closet

Measuring the space for this product is an extremely serious operation. As a rule, furniture of this type has right angles. Except for those cases when the room has oblique or curved elements.

IMPORTANT! IMPROPER MEASUREMENTS WILL RESULT IN THE FURNITURE IT WILL BE IMPOSSIBLE TO INSTALL IN ITS PLACE.

The most difficult place in the room, it can be considered that the most difficult element for normal installation will be the niches. In addition to the distance between the walls, you must also make sure that the walls are installed strictly perpendicular to the floor and ceiling. Even a slight curvature of the walls can lead to difficulties during the assembly and installation of furniture.

The algorithm for measuring a room looks something like this:

1. the first measurement between the walls is carried out either at the floor level or at the ceiling level;
2. then, with a certain step, similar measurements are taken along the entire height of the wall;
3. According to the same scheme, measurements are taken between the floor and the ceiling;
4. The results obtained are recorded on paper in the form of a sketch.

To draw a sketch, you can use computer-aided design programs, such as AutoCAD or Compass 3D. The use of these software systems allows you to create three-dimensional models of both the room and the future closet. Such models will serve as the basis for creating working drawings of parts of future furniture.

Important! Properly carried out measurements guarantee that the cabinet assembly will be completed with minimal expenditure of time and money.

Making a drawing on paper

As already noted, the basis for the development of sketches and drawings will be the obtained dimensions of the room in which the product will be installed. When making drawings, you can be guided by the following parameters:

• the maximum height is equal to the height of the room where it will be installed;
• the depth consists of two dimensions - the depth of the shelves, it is about 500–700 mm and the distance that will be required to install the guides along which the door will move.

How to make a drawing of a built-in wardrobe

To develop a drawing of the future cabinet you will need to know:

• Cabinet dimensions.
• Dimensions of its individual parts.
• Materials from which individual parts will be made, for example, sidewalls.
• How the cabinet will look from the inside, that is, or by hand, you will need to divide the cabinet into sections located both horizontally and vertically. Determine their sizes.

Before developing working documentation, you need to know where the necessary fittings will be installed. Mark the ends that will need to be edged. Using computer programs will allow you to print out the details and assembly order, but developing assembly technology will require the use of special subroutines. By the way, there are programs that specialize in designing such products.

How to make doors for a wardrobe with your own hands

Before you start making wardrobe doors, you need to select even sheets of material that you plan to send to the doors. To check the plane of the sheet, you can use a building level. This is necessary in order to avoid distortions during operation of the finished product. After the sheet has been selected, you will need to seal its exposed ends. This will prevent moisture contained in the air from penetrating into the slab and causing it to swell. After completing this operation, wheels are installed on the door, with the help of which it will move along the guides.

The cabinet door consists of:

• Sheet - this can be a sheet of chipboard or glass.
• Guides made of metal. They must be installed on the door leaf before assembling the wardrobe.

How to make a wardrobe for your bedroom yourself: a step-by-step guide

Before assembling the cabinet, certain work will be required.:

1. It is necessary to prepare a place for installation of the structure; it is quite possible that the walls will have to be leveled, that is, to ensure their verticality. It is possible that you will have to level both the floor and the ceiling.
2. Prepare materials, fittings and other components.

We manufacture individual parts

Guided by the previously obtained drawings, it is necessary to manufacture body parts. You can make them yourself; this will require an electric saw or jigsaw, but the best option would be to order ready-made parts from a specialized production facility. This can guarantee the quality of sheet cutting, unlike manual processing. By the way, as a rule, you can also order finishing of the ends of the sheet there.

Wardrobe assembly diagram

Typically, companies that manufacture wardrobes and install them in place. In this case, the consumer can only observe the assembly of the product and control the quality of the work performed. If the owner has purchased a ready-made cabinet, then, as a rule, the product is accompanied by detailed instructions for assembling the finished product and you only need to strictly follow its instructions. This way, you will get a high-quality design that will last for many years.

Making a built-in wardrobe at home: a step-by-step guide

To assemble the product, it makes sense to make templates that will ensure compliance with the angular dimensions of the structure.

• Cabinet assembly start with making the bottom. To increase the reliability of the structure after assembly on the basis of working drawings, it is advisable to fix the bottom to the floor. You can use anchor bolts for this.
• During the following operations assemble the frame, at the same time installing shelves. They connect the side sheets together, thus ensuring the rigidity of the cabinet as a whole. If you are going to build a built-in wardrobe, it makes sense to attach the side walls to the walls.
• After assembling the frame, you need to check the angles between the walls and shelves. They must be strictly equal to 90 degrees.Otherwise, the product will begin to warp, and the door will jam when moving along the installed guides. As a result, you will have to repair the cabinet, and this is quite an expensive undertaking. That is, when working, you need to use a measuring tool that allows you to control the angles.

All selected fittings can be installed on an already assembled cabinet. To install it, you must follow the requirements and assembly instructions, which are supplied along with the fittings.