DIY cot-house
To diversify and dilute the interior of a room, they most often use the design of unusual models. The sleeping place occupies special attention in the room, so when making it, many significant points should be taken into account. To help you in analyzing this matter, this article was written.
The content of the article
What to make a cot-house from
To create a truly practical structure, you need to choose the right sources. Their appearance will directly depend on the given shape. And the quantity is influenced by the dimensions of the product. So, for the frame you will need beams, the parameters of which should be approximately 5 by 5 centimeters.
If you plan to save on production, then it is better to use a tent style. In this model, the upper surface is represented as a fabric. It can be either organza or chiffon. If we rely on the most common cases, then boards or plywood sheets are used in the form of walls and roofs. Moreover, it is best that the second of those named is wooden, and its thickness is 0.6 centimeters. But for those who do not have wood products available, it is permissible to use drywall instead. In principle, there are no difficulties when interacting with it, since it lends itself well to cutting, except during installation.
Required Tools
To create a structure you should purchase the following list:
- hacksaw;
- screwdriver;
- electric jigsaw;
- sandpaper;
- construction adhesive;
- bolts and screws;
- pencil;
- drill with parameters 6 by 11 millimeters.
Bed components
All parts will be made from the following materials.
- Four wooden beams. As for the parameters, these are 40*70*1200 millimeters - width, length, height, respectively.
- And two bars 40*70*1660 cm.
- Mattress 165*80 centimeters.
DIY drawing of a crib-house
The entire scheme is based on the dimensions that you want to see in the future. If you have a small room, then it is advisable to make smaller sizes. You just need to make a sketch so that you have something to rely on and not get confused during the process itself. In principle, focusing solely on the instructions, you can create an equally high-quality device.
How to assemble a cot-house: step-by-step guide
For complete understanding, each individual stage will be described in detail.
Assembling the base
As usual, it all starts with the construction of a foundation on which the entire structure will be attached. And the initial step will be to make the main part from the bars (length = 1200 mm). After they are installed, each of them should be sawed off with a jigsaw, preferably at an angle of 45 degrees. To do this as accurately as possible, you can draw markings, additionally using a building level.
Assembly of side structures
From below you need to screw a block with 820 mm. The distance from the transverse to the floor should be 150 mm.Don't forget about the screed, which can usually be purchased at the store. Holes are pre-drilled in the lower part, and its depth = 130 millimeters. It is also worth making a recess in the side; it should be in the middle of the block and fit into the recess. A screw should be screwed into the formed opening, and then an eccentric (it is on this that the entire device will be secured).
Roof assembly
At this stage, you need to use bars, the length of which is 730 millimeters. You need to use all 4 pieces. At this point, you should remember how you sawed off the ends of the products for the base at an angle. The same manipulations should be performed in a similar way. Next, sandpaper will come in handy. With its help, it is recommended to process the resulting segments so that in the future your child cannot receive damage from them. As a result, a support for the entire structure should be formed. And the upper part, in turn, is attached thanks to glue to the general structure. Moreover, it is advisable to glue several times, thereby guaranteeing reliability. Next, the entire top needs to be placed on self-tapping screws at a distance of 4 mm from the border of the two roofs.
Decorating a crib-house
Of course, the entire decor and choice of shade will directly depend on the gender of the child. The most popular methods of coloring are the use of garlands or balls. In addition, it can be attached to the top of the mobile. They can be in the form of various animals or clouds. Canopies are also widely used. You just need to choose a suitable color for the interior and attach it. As for universal shades, beige or white are perfect for a wide variety of room looks.
