DIY bed for bedridden patients

There are many ways that can make caring for sick people easier. In this article we will try to consider one of them in detail.

How to make a bed for bedridden patients with your own hands

Since it is in the bedroom that a person spends the most time in his life, it is necessary that it be as comfortable and practical as possible. This can be achieved by independently designing a medical bed. This is quite easy to do and the process is straightforward. Moreover, the items that will be required to make the structure are considered accessible.

Drawing up a drawing

The do-it-yourself bed for bedridden patients, drawings of which can be found on the Internet, will depend on its purpose. The simplest option is to create a small support under the back of the person lying down. The structure can be used during meals.

This ensures maximum convenience for both caregivers and patients. In addition, it improves the patient’s blood circulation and gives the muscles the necessary load. When creating a diagram of a future product, it is worth considering the dimensions of the original bed. Their width parameters must strictly correspond.

Preparation of materials and tools

Making a bed for bedridden patients with your own hands begins with collecting the necessary items for the work process.First of all, you will need the following materials:

• One sheet of plywood - as a support area - with indicators of 860 * 520 * 5 millimeters;
• There are two of the same parts, only with dimensions of 900*800*10 mm;
• Four plywood strips 860*40*5 mm to make stops;
• Sandpaper.

As for the tools that will help you make a bed for bedridden patients with your own hands, these are:

• Hinge in the amount of 4 pieces;
• 36 nails with 12 millimeters;
• Wood glue;
• A clear varnish specifically designed for furniture;
• Self-tapping screws;
• Roulette;
• Electric drill;
• Screwdriver;
• Hammer;
• Drill;
• Sander.

Assembly of the structure

When all the items are ready, you can begin the main process - preparing materials and constructing the entire structure.

1. First you need to arm yourself with sanding and use it to process the plywood layers. It is worth paying special attention to protruding places and possible sharp edges of the product.
2. Next you need to take a drill and drill the central holes. It should be smaller than the diameter of the self-tapping screw with a countersunk head. Of course, for convenience, you can pre-mark the markings with a pencil. After the described manipulations are done, you should screw the hinges into the formed recesses, and fix the fundamental part on them.
3. Using glue, you should lubricate all existing plywood strips. One of them is a spacer. Next you need to attach them to the inside of the surface. It is best to do this as close to the border as possible. Then everything is secured with nails. All products must be secured so that there is a space between them at a distance of 70 millimeters.
4. It is important to make sure that the adhesive has dried and that the products are nailed tightly and securely.The entire structure must be made to the highest possible quality so that it can be used for many years.
5. To avoid possible damage to the structure in the future, it is recommended to use varnish for protection. It is advisable to cover it with two layers. This ensures long-lasting use.

As a result, you get an indispensable device that helps a sick person take a half-sitting position in order, for example, to eat, communicate with relatives, or watch TV. In addition, this position of the body is excellent for the prevention of heart disease.