How to disassemble a computer chair

No one is immune from various breakdowns of their furniture. Buying a new device every time is an expensive option. Therefore, in this article we will look at how you can transform an old chair into a completely new one, without much expense or difficulty.

How to disassemble a computer chair - procedure

There are several so-called sources of computer chair failure. Accordingly, separate elimination methods should be applied to each of them. The most common breakdown is the gas lift. To eliminate it, you will need to make a replacement. To do this, you should arm yourself with the following tools:

• Screwdriver.
• Hammer.
• Lubrication.
• Pliers.
• Bolt.

After cooking, you can proceed to the main part. By following the further instructions in the presented sequence, you can easily update the structure:

• The first step is to remove the wheels. After which you can remove the backrest by unscrewing all the fasteners. At this stage, do not forget about the armrests - they also need to be removed from the main part.
• Then you should remove the seat by unscrewing the screws on the bottom. After the described manipulations, you can remove the protective cover. This will help you detect gas lift. You will have to knock it out with a hammer.It may happen that the process will be difficult, for this it is worth using technical lubricant and continuing with the original steps.
• As for the cross, it's a matter of performing similar steps. However, the main difference is the use of pliers. The process itself involves carefully tapping the parts.

ATTENTION! Make sure that the gas chamber is intact (it is located in the center of the structure). You can also use lubricant to make work easier.

• Finally, you will need to put the entire structure back together. This means screwing the seat to its original location, assembling the crosspiece, pre-installing the wheels and updating the gas lift through the corresponding recess. Then you need to put on the cover and completely attach the seat.

How to disassemble the backrest

Most people often ask the question of removing the back of the structure. Most often this is necessary to reupholster the base. To do this, you do not need to disassemble the structure completely. It will be enough to disassemble the necessary individual parts. The only thing that can be mentioned is the possible difference in the fastening of each model. However, as you can see, the principle is more or less similar for everyone. Removing the backrest from the chair is a simple process. You just need to arm yourself with your own resources and unscrew the part on the back, after which the element can easily be tilted away from you. Now it is possible to remove the casing and replace it with a fresh one, having previously unfastened the latches with careful movements.

What difficulties might you encounter?

Before starting work, you should understand what difficulties you may encounter. This list includes the following points:

• During long-term use, the parts may become attached to each other in such a way that it becomes difficult to separate them. To prevent this phenomenon, it is recommended to use special lubricants and electrical devices.
• Since the design contains small components, they should be carefully monitored. To do this, it is advisable to call an assistant who will perform this function.
• Due to the complexity of the device, disassembly can be difficult. Therefore, it is no exception that additional tools will be needed. When using them, do not forget about safety precautions. All actions must be performed as accurately and accurately as possible.