How to make an armchair from a chair

Not all furniture remains durable. Sometimes when you change the interior, the old furnishings no longer fit the interior. But you shouldn’t throw away good furniture, because you can create something new and original from it. For example, an old chair can be turned into cute chairs that are easy to make yourself.

What kind of chair can be made from a chair?

You can make different types of chairs from a chair. For example, these:

1. Fireplace. Looks very presentable. The conversion includes a complete repaint and upholstery of both the seat and backrest.
2. Hanging. The chair of this plan is made from any chair, although you need a larger size than the standard one. The main thing is to ensure good support for the back and armrests. In this embodiment, the legs of the furniture are removed.
3. Oval. Can be made from a large chair. This design is difficult to implement, but feasible. In furniture, the shape of the seat is changed and the backrest is widened, characteristic of this shape.
4. Computer. Converting a chair into a computer chair includes full upholstery with soft material, installing wheels on the legs and changing the armrests.
5. Rocking chair. In this case, curved elements are attached to the legs, which will allow the chair to swing. In this case, the upholstery is done lightly or not at all.

First of all, the direction of the alteration will completely depend on the original shape of the furniture.If it is of a standard design, then you should not try to make furniture of a complex shape, such a front end will be too long and expensive.

Attention! When remodeling old furniture, the main thing is to use your imagination. This will help to create a designer find from nondescript furniture that will fit perfectly into any interior.

Preparing for work

Before starting work, you need to prepare the old item:

1. The chair must be completely disassembled.
2. Clean each part from dirt and sand it with sandpaper.
3. Replace broken parts, for example, it is the flat part in the center that can be replaced frequently.

Important! It is necessary to completely replace parts that are rotten or have invisible breaks. This must be done not only for aesthetic purposes, but also for the safety of further use of the furniture.

Also for further work you need to prepare the following items:

• furniture stapler;
• quick-drying fabric glue;
• foam rubber and padding polyester in a roll;
• upholstery material;
• white primer;
• paint of the chosen shade.

Advice! In order for the remodel to fit into the interior, you need to choose a color that matches other furniture or wall shades.

Do-it-yourself armchair from a chair: step by step

All work on converting a chair into an armchair occurs in several stages:

1. The chair, previously disassembled and cleared of old paint, must be assembled and coated with two layers of primer. It is important to wait until each layer is completely dry. For ease of painting embossed parts, it is recommended to use a medium-sized brush.
2. When the entire surface is covered with primer, you need to paint the chair with paint of the selected color. It is recommended to apply two layers, preferably using matte paints. If necessary, the chair is varnished.
3. First of all, it is necessary to perform a soft finishing of the backrest. To do this, you need to cover the foam rubber in the shape of the back or 2-3 mm more with fabric. Then glue it to the surface of the back and secure with a stapler. The staples can be placed directly in the middle or in a staggered pattern. Buttons covered with fabric are installed inside the resulting holes for decoration.
4. The armrests are wrapped in a thick layer of foam that is secured to and under the seat. Then they are covered with fabric, securing it in the same way.
5. The seat is made of 2 layers of foam rubber. It is glued and then covered with material. It is important that the foam rubber covered the open part of the edge of the seat.

Advice! To make the chair even softer, it is recommended to cover the foam rubber with 2 layers of synthetic padding after fixing it. It can be attached with a stapler or glue along the edges.

The result is a soft chair on thin, high legs. You can also simply cover the frame with foam rubber and put a chair cover of a suitable size on it. This design option will allow you to cover the legs under hanging fabric.

From a chair you can easily make a beautiful and soft armchair that will fit perfectly into the interior. This option for making furniture will help create a unique piece of furniture.