DIY corner sofa

Of course, independent production brings a lot of pleasure and, most importantly, it provides a guarantee of high-quality products, since you yourself are directly responsible for this. In addition, this process will be much cheaper than if you purchased the product in a store. However, you should take into account some nuances and little secrets that will help you create the ideal place to relax as comfortable and convenient as possible. This is what will be discussed in this article.

Features of making a corner sofa with your own hands

Before you start creating a corner sofa for the kitchen with your own hands, you need to consider the following factors:

• The angle at which the backrest will be tilted;
• Dimensions of both the entire device and individual elements (its components);
• If you are designing a folding mechanism, then this also needs to be taken into account;
• Compartments designed for storing things;
• Leg height;
• An indicator of not only rigidity, but also the thickness of each component of the entire structure.

In addition to all of the above, do not forget about your own weight. This is necessary to correctly calculate the load to which the furniture will be subjected.

Using diagrams and drawings to create a sofa

To make a corner kitchen sofa with your own hands, you can use existing samples that have been tested by many experienced users. This will ensure that there are no possible drawbacks than if you were to design it yourself.

Selection of materials and tools

How to make a corner sofa with your own hands, can you find drawings on the Internet? To ensure maximum reliability, it is necessary to use high-quality materials during construction. They should be selected carefully. As for special materials, you will need:

1. Chipboard: must be laminated. If it is not like that, then you can coat it with varnish.
2. Birch plywood, but you can use another one.
3. Coniferous timber.
4. Threads and fabric. They are necessary for upholstery.
5. Legs (each 5 centimeters).
6. Construction adhesives. Moreover, their composition should be varied, since you will have to use different surfaces.
7. Foam rubber (from 2 to 4 cm). It is possible to use other soft fillers, for example, padding polyester.
8. Ready-made, store-bought, transforming mechanism.

How to make a corner sofa yourself? Now you can start collecting from the list of products with which you can complete the workflow. It includes:

1. Electric drill.
2. Bolts, screws and nails.
3. Sewing machine.
4. Knife. The main thing is that it is sharp, otherwise the foam will not be cut.
5. Wort. You can buy the simplest thing.
6. Powerful stapler.
7. Hand saw.

Product assembly

Once everything is pre-prepared, you can begin to act. They are represented in the following algorithm:

• To begin with, armrests are made, the parameters of which are 90 by 20 by 55 cm.You need to take chipboard and two bars. Screw the screws into the sheet and attach the product to the beams. The gap between the products should be at least 20 cm. Next, take nails and attach them to the fiberboard at a distance of 15 cm. After that, eliminate any roughness on the surface and use glue to fix the structure with foam rubber.
• Then you should deal with the left side. Take plywood sheets and use them to attach screws to the chipboard (4 pieces on each side). After which, it is worth making a screed using timber.
• To complete the sitting section, you will need an even block. The diagonals of the frame should be made as even and equal as possible. It is advisable to lubricate the entire surface for fastening with glue, and then it must be installed on the base. For greater strength, use self-tapping screws, the distance between which should be from 15 to 20 cm.
• After completing the manipulations, attach the fiberboard to the back, and then provide the structure with foam rubber.
• Let's move on to assembling the right side. Along the entire perimeter in the corners, provide the space with beams, and fasten all the parts with sheets of plywood. The bottom will consist of chipboard. And in the place of the lifting mechanism you need to drill holes.
• Before working with the filler, it is advisable to take the necessary measurements. Make a pattern and cut out all the details. You should first iron the finished fabric.
• Then connect the product to the sofa using pins to understand how to sew on a machine in the future. You will need a stapler to secure it.

How to make a sofa for the kitchen with your own hands: nuances

When making a corner sofa with your own hands, drawings and diagrams of which can be found on the Internet, it is important to take into account its size, since in this case every centimeter is important.It is best to choose a small one; in the kitchen this is not the most important design, so it should be compact. It is worth paying attention to the upholstery - when choosing a fabric, you need to take care of good ventilation.

And, perhaps, the last piece of advice would be to provide a function for changing the cover. This will allow you to get rid of dirt and makes it easy to clean.