LED chandelier does not light - reasons

Lighting sources are not as simple as it might seem at first glance. It would seem that there is nothing to break - two wires, a switch and a light bulb. It's not that simple. Modern lighting devices are “stuffed” with electronics and equipped with control panels.

Today we will look at the question: “Why doesn’t the LED chandelier light up?”

Common Causes

The first thing to do is check the inclusion methods. These include switching equipment and a control panel. If the chandelier does not turn on in any of the ways, then the cause of the breakdown may well be hidden in the controller.

Chandelier device

Do not rush to dismantle the chandelier. First check serviceability of control systems, Perhaps the batteries in the remote control are simply dead or missing altogether. Sellers rarely supply the remote control with batteries.

To carry out further verification, you must have certain skills and patience. Necessary remove the controller from the circuit, and then connect the halogen and LED units directly to the electrical network. If everything works and the chandelier lights up as it should, then the problem is in the controller. If you don’t understand what we’re talking about and where to look for it - Call a qualified electrician.

This is what the controller looks like

If this method did not help, and the chandelier is still not going to light, the reason may lie in power supplies. This is also quite easy to check. You just need to make sure that the light bulbs themselves are working.If the lamps are working properly, then the problem is probably in the batteries.

Repair

Repair work, regardless of the malfunction, will also not take much time and effort. However, it is necessary here maintain consistency. The first thing you need to start with is control systems. It is necessary to check them carefully, and if they are not the problem, eliminate potential causes further according to the list indicated above.

Important! If you don’t have the necessary operating skills or at least an idea of ​​what kind of part is in front of you, don’t be lazy to spend a little time and familiarize yourself with the basic basics of electrics, and at the same time with the instructions supplied with the product. Otherwise you can immediately go to the store for a new chandelier, bypassing the above troubleshooting steps.

The remote control is one of the common problems

Please note that a fairly common solution to the problem of a non-working LED chandelier is a simple replacing the remote control.

If the problem still persists, you should move on to the controller, batteries, and further down the list. And of course, do not forget to check the performance of the chandelier after each step of the work carried out to eliminate the breakdown.