How to remove a label from a glass bottle?

Glass bottles are always useful for home use, but first they will have to be cleaned of their factory labels. Most housewives know that this is difficult to do. And we are not talking about the paper emblem itself, but about the glue that holds it on the glass wall. The problem is especially acute when the container has a ribbed surface.

How to clean a label from a glass bottle

Beautiful glass containers can take their rightful place among the dishes. Homemade drinks, compotes or fruit drinks are placed in them, vegetable oil is poured or a tincture is made.

Only containers that have been previously cleared of labels look attractive in the kitchen interior.

We have prepared seven effective ways that will help you say goodbye not only to paper sticker on the side wall of the container, but also remove the adhesive composition.

WD-40

This product is a liquid lubricant that can be found in every car enthusiast’s arsenal. It removes rust, for example from old bolts. The substance also easily copes with hardened glue on a glass bottle.

Sequence of action:

1. Direct the sprayer onto the side of the container where the sticker was.
2. Activate the lever by pressing it.
3. Leave the applied composition for 10 minutes.
4. Remove it with a clean damp cloth along with any dirt.
5. Wash the glass container with water and soapy water.

Be careful when working with the composition.Do not spray near open flames. It is better to do this not at home, as the fumes are toxic to humans. In addition, equip yourself with gloves and a protective respirator to avoid harm to your health.

Soap solution

Safe and effective way. To prepare the product, grind half a bar of laundry soap on a grater, pour it into a basin and fill it with hot water. Stir until completely dissolved. Add liquids if necessary.

The bottle is immersed inside. To prevent it from floating, fill it in advance. You need to keep it in the basin for an hour, then remove any remaining glue using a stiff brush. The label comes off easily if the water is as hot as possible.

Liquid household soap is also suitable for the solution.

Soda

The bulk product in an amount of 100 g is diluted in water (1 l) in a basin. Place a filled bottle in the resulting mixture and wait an hour. Next, use a hard sponge to remove the softened glue.

If necessary, pour soda directly onto the bottle. This will not harm the container, but will speed up the cleaning process.

Acetone

This option is used only after removing the paper sticker and manually removing the remaining label. We begin the procedure when only sticky strips of glue remain on the container. First, generously moisten a cotton pad with acetone and wipe off the dirt, leaving it in place as a compress for 10–15 minutes.

After the specified period of time, the rag or tampon is wrung out of excess moisture and the dirt is removed mechanically. After using acetone and removing the label, the container should be washed with plenty of water and soapy water.

Alcohol

Any alcohol-containing composition can become a glue remover. It is applied to the tampon and the label is blotted, moisturizing generously.If the bottle is old and the adhesive layer is old, it is also recommended to make compresses for half an hour. Then it is removed mechanically.

Solvent

Difficult stains can be easily removed using paint thinners. Substances such as gasoline, white spirit, kerosene, turpentine and others are suitable. Be sure to protect your hands and respiratory organs to avoid harm to health.

Moisten a cotton pad with the product and carefully remove the label, wiping the area of ​​the sticker. It is allowed to apply a compress for a quarter of an hour if the stains are very stubborn. Be sure to rinse the bottle with clean water.

Vegetable oil

Any oil is suitable for these purposes: sunflower, olive, flaxseed, hemp and others. To effectively remove the sticker, make a compress well soaked in a fatty product and apply it to the area of ​​contamination. Residues are washed mechanically and the bottle is washed with soap and water.

Hairdryer

Adhesive-based labels come off the glass surface well if you warm them thoroughly with a stream of hot air. Point the hairdryer at the sticker and hold it on the hottest setting for a few minutes. After this you can peel off the label. If the glue partially remains on the surface of the bottle, it can be removed with warm water.

All of these methods are available and effective. If you need to remove the label from the container, use one of the proposed options with substances available in the house.