How to make a stylus from foil?
Touch phones are conveniently controlled using a stylus. But multifunctional “handles” are expensive - not everyone can afford such a purchase. However, it is easy to make it yourself from scrap materials. For example, from foil. They are no less functional, but do not require investment.
The content of the article
How to make a stylus for a phone from foil?
Each device has a different screen type. It is important to define this parameter to understand what to make a stylus from for working on a gadget. It is convenient for them to work on a tablet or phone, especially if they need to carry out manipulations with gloves on the street.
Don't rush - don't waste money on expensive equipment. Improvised items will be useful in creation.
Important: phone screen type
The absence of interference and clear execution of commands is possible only after determining the type of screen. Some of them are completely incompatible with foil. Thus, phones running on Android platforms, as well as iPhone and iPad, Kindle and many other brands of gadgets, have a capacitive screen.
To work with such a coating, an electrical conductor is required.
Most devices used to read books in electronic format, as well as game consoles, are equipped with resistive and infrared screens. In this case, the stylus material does not matter. The main thing is not to scratch it while working.
To check the screen type, just touch it with the tip of a ballpoint pen cap. If the gadget responds, then your device is resistive or infrared. Provided that nothing happened during the touch, it is capacitive.
Is it easier to buy?
Many people think that it is much easier to buy a new stylus and not do crafts at home. Perhaps for some it will be more convenient to do so. However, this will require money and time. Remember that the stylus is from foil You can create it yourself without investment, literally in one evening.
Making a stylus from foil
Glitter paper is used in various aspects of our lives. Craftsmen have adapted it to work with gadgets. If the screen is capacitive and operates on the principle of contact with a finger, this option is perfect.
What is necessary?
To create the tool you will need:
- aluminum foil paper - 30 cm;
- tape or tape;
- unsharpened pencil;
- stationery knife.
Everything you need is sure to be found in every home.
Preparation method
A chopstick or pen with a cap will work just as well. Cut off the tip a little, but so that at least 4 mm of flat surface remains.
Wrap some foil around the handle. There must be more than two layers. Do this as carefully as possible, especially in the tip area. Avoid rough folds.
On the working part, the foil is leveled - this is the only way the item will work without problems.
Wrap the central part with adhesive tape and the tip with tape so as not to accidentally damage the gadget's screen, and also secure the foil. Try the stylus. If the phone doesn't respond, smooth out the tip or add more layers.
The finished product will allow you to conveniently work on your phone, print messages, create sketches and much more.
