What happens if you rub your bathroom mirror with shaving foam once a week?

Every person has experienced the fact that after taking a bath or shower, the mirror fogs up. The reason for this is the heating and increase in air humidity during water procedures. When air hits a cold surface, condensation forms. As a result, it becomes impossible to see the reflection.

In this case, you have to wait until the condensate evaporates. Of course, you can wipe the surface with a dry cloth or dry it with a hairdryer. However, there are various special means and folk methods that prevent fogging.

Why rub your bathroom mirror with shaving foam?

Shaving cream and foam are excellent anti-fog products. A product from any manufacturer will do. You will also need a dry cloth or microfiber:

1. First, the mirror should be thoroughly washed and the bathroom should be ventilated.
2. Foam or cream must be applied in an even layer over the entire area to be treated.
3. Use a lint-free cloth or microfiber to wipe the mirror surface dry.

Attention! You don't need to use too much shaving product. Otherwise, stains will form that are quite difficult to remove.

A microscopic layer of cream or foam forms on the mirror, which will prevent further fogging. Usually one procedure lasts for several weeks, but if necessary, you can treat the product with foam every week.

How to care for a mirror so it doesn't fog up

You can prevent fogging using industrial means or folk methods:

1. Ventilation. The ventilation grille located in the bathroom must be periodically cleaned of accumulated dust. This is necessary to ensure constant air circulation in the room.
2. Shampoo. The mirror must first be thoroughly washed and wiped dry. Apply a few drops of any shampoo to a dry, lint-free cloth. The product must be applied evenly to the entire surface, then wiped with a clean, dry cloth. You should wipe until the soap stains completely disappear. The results obtained usually last for 2–3 weeks.
3. Glycerol. The product copes well with fogging of windows and mirrors. It is part of cosmetic soap. Moreover, the substance is completely safe, odorless and does not cause allergies. You can buy it at any pharmacy. Glycerin can be added to water when cleaning, or it can be applied to the product.
4. Gelatin. One teaspoon of dry gelatin should be dissolved in 50 ml of water. The resulting composition must be applied to the surface. The solution creates a thin transparent film that will protect against the accumulation of water droplets.
5. Vinegar. Water and vinegar should be mixed in a one to one ratio. The resulting solution can be poured into a spray bottle for ease of application. The composition must be used when cleaning the premises. After application, the treated surface should be wiped with a dry, lint-free cloth.For greater effectiveness, you can add a little liquid detergent to the solution.
6. Toothpaste. The paste should be applied to a cotton pad, wipe the surface and rinse thoroughly. It will not only prevent fogging, but also remove various contaminants.
7. Soap. One of the simplest and most common options for combating fogging. The dry product should be rubbed with any soap, and then the resulting marks should be removed using microfiber.

All of the above products can easily cope with the problem of mirror fogging. At the same time, they will remove the resulting stains and return the product to its original shine. Whichever one is used, the main thing is to repeat the procedure regularly.