DIY fan heater

Autumn and winter time is cold and slush, but every person wants warmth and comfort. Many people buy heating devices for this purpose to make the house comfortable and pleasant. Not everyone knows that you can build a heating device yourself, of course, provided that your hands have grown from the right place. If a person is incompetent in a matter such as constructing homemade devices, then it is better to purchase it at a shopping center.

A good owner will always find material for a homemade device. After all, many men like to collect various rubbish with the hope that it will be useful. The simplicity of the design makes it possible to select all the necessary materials at home, from such economical people.

Design solution for space heating system

Any model of the device is equipped with the main elements, these are:

• Fan to distribute air flow.
• Heating device in the form of a spiral.
• The housing that contains all the heating elements.

The principle of operation is simple: with the help of a fan, heated air is distributed throughout the room, creating the desired room temperature. Even better, set a temperature regime that gives a certain temperature and saves electricity perfectly.

For domestic purposes, small devices are used; they can be installed anywhere, as long as there is a connection to the electrical network.

Important! A homemade device can be equipped with a protective element against overheating of the device; this is the best protection to protect yourself from troubles associated with fire or breakdown.

The device’s spiral must be installed with all precautions, since any mistake will lead to irreversible processes. The spiral must be secured so that it does not touch the body and is well insulated at the joints. The base of the heat fan is made of different materials, as long as it does not conduct current.

What heating elements can be used

Depending on the configuration and dimensions of the thermal device, a heating element is selected. Suitable for homemade devices:

• Steel chrome spiral.
• Different types of shade.
• Heating device made of ceramic.

The spiral system does not give a very positive effect. When heated, it gives good heat, but reduces air humidity, and therefore has a bad effect on human health. Long-term use is undesirable or the room must be ventilated frequently.

The same cannot be said about Ten. After all, there is sand in a metal pipe, and heating it perfectly retains heat. The option with a shadow is a good solution. The device does not require oxygen and is safer to use.

Ceramic heating medium is more expensive and more complex, but extremely safe. The heating of ceramics is much lower, and efficiency is achieved due to the large space between the air and the heater.Ceramic heater, completely safe, even getting burned is almost impossible.

Types of heat fans

Homemade heat fans come in completely different varieties. It depends on the purpose of their use.

Asbestos heater

For example, a structure made of asbestos pipe. To create a heating device, a pipe with a diameter of 15 centimeters and a wall thickness of 10 centimeters is suitable. The body can be from half a meter or more, but the most optimal option is 60 centimeters. They use a pipe to wrap it in a spiral, and then install it between two supports.

Heat gun

Sometimes a device is needed to heat a large area. In such cases, our craftsmen can build a heating system called (Heat Gun). This is the largest model. Heating of a large space is guaranteed.

A fan heater is a fairly simple device in design. Whether the heating device is water-based or not, you can make it yourself, but be careful. Because the safety of the design is the most important rule, so that the device does not lead to a fire or various types of injuries.