What is a micathermic heater?

Micathermic heaterCurrently, the market is represented by a wide variety of heaters that operate from the electrical network. And one of the most striking new products of recent times has become a micathermic heater, which manufacturers position as an infrared heat source. What are the operating features of this device and what criteria should you pay attention to when purchasing?

What is a micathermic heater?

These are relatively new units that have recently appeared on the domestic market. They are produced based on new technical developments. The production of such devices has been mastered not only by foreign, but also by Russian enterprises, whose products are rapidly gaining popularity and are gradually approaching leading positions.

Principle of operation

Any of the modern heaters operating from an electrical network increases the air temperature inside the room. In other words, the operating principle of such devices is as follows: air molecules heat up, after which they mix with cold molecules, and the area begins to warm up.

But as mentioned above, the presented type of devices is based on the principle of IR units, and accordingly their work is based on infrared radiation. To achieve optimal temperature indicators in the apartment, these devices begin to emit IR waves, heating objects, which subsequently give off heat and increase the temperature indicators.

Device

Operating principle of a micathermic heaterThe role of the heat source in the presented models is played by a plate that efficiently emits infrared rays. But it itself does not heat up, and accordingly, when touching it, the consumer will not burn his hand.

This plate includes many layers, each of which is covered with mica. This means that the design of the devices does not include coolant. And accordingly, owners of micathermic heaters will not encounter burnout of the coil.

The plates are located in a housing made of high-quality metal. There are nets on both sides. They do not block the penetration of rays. Due to the fact that the heater includes 2 such grids, heat emanates from two sides. More advanced models are equipped with two additional layers, one of which reflects and the other concentrates heat. That is why warm currents are directed in the same direction. Such models are designed for installation on the walls of a room.

Pros of devices

In addition, micathermic heaters will delight owners with a number of significant advantages, which include the following:

  • the device does not require time to heat itself, which is why it immediately releases heat to the apartment;
  • compact dimensions and low weight;
  • optimal energy consumption compared to other heaters;
  • no noise during operation.

Correct use of the device

Micathermic heater in an apartmentSafety when operating household appliances is paramount. In principle, the precautions for using the presented unit will differ little from the measures applicable to similar equipment. After purchasing a micathermic heater, you will need to follow the rules listed below:

  1. The unit must be used in accordance with the instructions supplied with it.
  2. It is forbidden to connect the device to the network if damage to the housing or power cord is visible.
  3. Do not allow the device to come into contact with open moisture.
  4. The power cable must always be visible.
  5. The distance from the unit to flammable items (upholstered furniture, books, curtains, curtains, etc.) must be at least 1 meter.
  6. Do not dry clothes or other items on the heater.
  7. Do not point the unit towards objects that deform under the influence of elevated temperatures.
  8. It is necessary to prevent debris and other loose materials from getting inside the device, causing short circuits in the wiring and, as a result, failure of the device.
  9. On a regular basis, it is recommended to wipe the heater from dust, and best of all, clean it with a vacuum cleaner. To do this, you will need to disconnect the device from the electrical network and wait until it cools down completely.
  10. Do not use various chemicals or abrasives to clean the housing. This can damage the paintwork, which will further cause corrosion.
  11. Do not cover the housing with a cloth, as this may cause a fire.
  12. Also, it is strictly forbidden to try to disassemble the device yourself or perform repairs yourself.In case of malfunctions, you must contact warranty service centers, and after its expiration, contact specialized services for repairing household appliances.

If you follow the indicated rules, your micathermic heater will last for a long time, and as a result you will enjoy the optimal air temperature in the room on a regular basis.

How to care for a micathermic heater

Using a micathermic heater in an apartmentWhen you go to the store and are already making a purchase at the checkout, do not forget to ask the consultant about the features of caring for the purchased heater. It’s just that the instructions do not always include such information. In addition, it is the legal right of any consumer to be interested in such information.

If you still cannot find out the necessary information, simply follow the recommendations presented below:

  1. The optimal temperature of the device can be called 25 degrees. As this temperature rises, the level of electricity consumption will also increase significantly.
  2. Before turning on the device, you must make sure that there is no damage to the glass in the apartment. For example, cracks in the window or broken glass. If there are any, the operation of the device is unlikely to bring the desired results.
  3. If the apartment has a heated floor, it is recommended to install a voltage stabilizer to prevent all kinds of wiring problems.

In addition, we should not forget about the basic rules for cleaning the device from dirt and dust. Before starting, you need to de-energize the system and give it time to cool completely.Then you will need to take a slightly damp cloth and remove any dust on the case.

IMPORTANT! Do not allow moisture to get inside the device, as this can lead to its failure and costly repairs!

If there are small holes on the body of the device, take a vacuum cleaner and use it to clean hard-to-reach areas.

ATTENTION! The use of auxiliary detergents is strictly prohibited!

What to look for during the selection process

To choose a high-quality micathermic heater, you need to understand its features. As mentioned above, the plates of the device are covered with mica. This material does not emit harmful gases at heating temperatures up to 1100 degrees.

But why do manufacturers prefer this material? Everything is extremely simple:

  1. Mica is a natural insulator that does not conduct current, does not absorb moisture and is an extremely durable material.
  2. Coating the plates with mica made it possible to rid the devices of the characteristic crackling sound during operation.
  3. Dust does not burn on a mica-coated surface.

Micathermic heaters work at full capacity immediately after connection. In view of the above, for an ordinary apartment a device with a power rating of no more than 1500 watts is sufficient. In this case, it is recommended to pay attention to the presence of a thermostat. If it is not there, then activation and deactivation of the device will need to be done in a hand-held device.

In addition, it is recommended to consider the location where the device will be located. There are many models on the market with different types of fastening. They can be mounted on the ceiling, walls, built into furniture or simply stand on the floor.

It is also recommended to inquire about the available operating modes.More modern models have broad functionality and can independently change the operating mode without human intervention.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers