How to connect a gsm module to a boiler

The basis for comfortable living in a home is the efficient operation of the heating system. A modern boiler with a high level of efficiency, operating on solid, liquid or gaseous fuel, helps maintain heat inside the home. Additional equipment of the heating system with an innovative GSM module will provide simple and convenient control over the operation of a home boiler room using a cellular network, increasing its energy efficiency and cost-effectiveness.

Features and capabilities of the gsm module

The GSM module for heating devices is a whole system that allows you to remotely and automatically control the heating operation. The use of such a module will help increase heat transfer, as well as increase service life, and eliminate the occurrence of emergency situations.

The standard package of the GSM control system for heating devices includes a number of components:

1. Controller. The device has a different number of inputs and is used to connect a number of additional devices and remotely control the system via a cellular network.
2. Temperature sensors. Depending on the controller model, the number of internal and external sensors can range from two to ten.
3. Cellular antenna.The main task of this element is to strengthen the signal for the most reliable and uninterrupted connection of heating equipment with the owner’s mobile device.
4. Additional sensors. As a rule, these include sensors that react to movement, fire, temperature increases above a critical point, all kinds of emergency sirens, fuel level control sensors (for boilers using diesel fuel or gasoline).

The functionality of any modern GSM module is incredibly extensive. Such a simple and inexpensive device allows you to remotely turn heating equipment on and off, configure operating modes, and obtain information regarding the coolant temperature and indoor conditions. In addition, the controller will notify you of a gas leak, fire, or power surges in the network.

How to connect a gsm module to a boiler

The procedure for connecting the network controller to heating units is carried out in a certain sequence and consists of several stages:

1. Installation of sensors in the room and inside the boiler, connecting them to a single controller.
2. Preparing and installing a SIM card. You should disable the PIN code on the card, and also enter a certain list of trusted numbers.
3. Checking the system operation. The GSM module software has a number of basic settings that ensure the start of the functioning of the entire system. The user will have access to data on temperature, network voltage and other characteristics of the boiler.

REFERENCE! Controlling the heating system using a cellular controller is quite simple. There is a certain number of SMS commands, by sending which you can perform various actions - turn the boiler on and off, set the heating temperature of the coolant.

Advantages and disadvantages of the module

Modern GSM modules are self-sufficient and functional devices that can increase the comfort of using boilers. The advantages of such devices include:

1. Remote control of all boiler functionality via SMS messages. The list of such commands is usually specified in the operating instructions from the equipment manufacturer.
2. Instantly obtain data on the operation of the heating system, even at a significant distance (the main thing is to have access to a cellular network).
3. Automatic notification of problems and malfunctions of the heater - power surges, extinction, gas leaks, overheating.
4. Effective protection of the GSM module from unauthorized entry by outsiders using a PIN code set by the owner himself.

Despite a number of advantages, boiler modules also have some disadvantages:

1. The need for a stable connection to the cellular network. In this case, the coverage must be both in the area where the heating device is installed and in the location of its owner.
2. The absence in some budget models of GSM modules of the option to turn the boiler on and off remotely.
3. High cost of additional equipment.

In general, GSM modules can be called a good choice for any boiler - from solid fuel to gas. Heating systems of any size can be equipped with such equipment, including those installed in a private home, country house, warehouse or industrial premises. Together with such controllers, heating systems will operate more efficiently, reliably and trouble-free, informing the owner of all changes, be it heating or cooling of the coolant, or stopping the fuel supply.