Rating of water-cooled electric tile cutters: which one is better to buy

creativecommons.org

In the professional world, the old hand-held cutters have long been replaced by electric cutters. The reason is simple - equipment with a power source works “independently”; the master only needs to control the device without physical effort. As a result, the work is completed several times faster, and your hands do not get tired.

Using the best electric tile cutter, you can cut at an angle, diagonally; make cutouts, grooves for electronics or various notches. The equipment has found its application in non-metallic materials: from rough stone sheets to thin sheets of tiles. The cut is obtained with “jewelry precision”, and the percentage of chips is reduced to a minimum.

Overview of the electric tile cutter device

The design of the machine is simple - only 2 components: the cutting part and the support frame. The latter has the engine and fasteners installed. As a cutter, use a diamond-coated disk or another material.

Regarding diamond chips: they are many times better than conventional materials - they cut granite, porcelain tiles, tiles, porcelain and even concrete without any problems.The main thing is to choose the right cutting material to match the technical parameters of your best electric tile cutter.

Review of water-cooled electric tile cutters

You have probably noticed that the same tiles or tiles produce a lot of dust that is hazardous to breathing - the crumbs are very fine, and it is forbidden to work without protection! To simplify the work of a professional, they came up with a water-cooled machine.

When the machine starts, liquid is supplied to the working part, cooling the cutting area and discs. This not only removes excess dust, but also lubricates the seam. As a result, you get an even cut that does not require additional polishing.

And this is just a little of what a water-cooled device can do. Also, your disk will never overheat, and as a result:

• cutting productivity improves;
• a larger volume of work is performed with one nozzle;
• you can try cutting rougher surfaces;
• the final wear time of the knife increases.

Such “buns” add several rules for caring for the instrument and require a little more payment for the pleasure. Make sure that there is always water in the machine, otherwise the system will simply be useless. After finishing the cutting process, always drain the fluid and replace it with a new one - dirty water with debris will cause the tool more trouble than it is worth.

Which electric tile cutter is better - selection criteria

Type of food. A water-cooled machine uses several energy sources: mains power or battery power. If there is a 220 V outlet nearby in the room, buy the first option, it will be several times cheaper. The battery format is suitable for off-site construction or places without electrification.The duration of work depends on the density of the material being cut.

Types of carvers. Each instrument differs from the other in the location of the disk. Large models have a saw part at the top of the structure - the weight of the device increases, but the productivity of the device is several times better than others. Bottom-mounted tile cutters are popular due to their lightness and mobility. Such a tool must be supplied with materials manually.

Another format is a carver without a table. It is cheaper than the others because it does not have guide elements. To work, you must use a solid plane (for example, a chair).

Maximum dimensions of the saw part. Pay attention to this option - the price and amount of work performed depend on it. The best tile cutter for professionals cuts 200-350 mm in diameter. These discs can be used to cut not only tiles, but also marble or granite. For home use, a diameter of 80-120 mm is sufficient - this is enough for laying tiles in the yard or in the bathroom.

Rating of water-cooled electric tile cutters - list of models

Fubag FB 350

Professional cutter model Fubag FB 350. The machine has a movable carriage - you can adjust the seam and its size. The manufacturer installed a disk in the upper part, which can be rotated 45 degrees. Users noted the design of the pneumatic cylinder, which allows you to smoothly move the cutting part up and down. The machine also comes with a pump that supplies fluid to the work area. Features large cutting formats and a variety of materials. The disadvantage is its price.

Helmut FS230H

Mobile design from a German manufacturer in our rating of electric tile cutters. The Helmut FS230H machine has folding legs and handles for carrying.Despite the small weight by the standards of the machine (55 kg), it is assembled with strong and stable structures. The dimensions of the device make it possible to reduce vibration on the saw blade, the diameter of which is 230 mm. The carver is able to cut 45 mm at a depth of 90 degrees. When the angle is halved, the cutting depth decreases by 5 mm. Thanks to the Chinese assembler, the price of equipment attracts Russian buyers - it is significantly lower than at “brand” factories.

DeWALT DWC410

creativecommons.org

The DeWALT DWC410 is a compact tool without a mounting frame. Weight is only 3 kg, it needs to be used only with the support of a specialist. The coolant is supplied through a special tube. Additional physical effort and work platform are required for optimal performance. The maximum diameter of the saw part is 110 mm. The cutting depth with such dimensions is no more than 34 mm. The 1300 W motor reaches a speed of 13 thousand rpm. It is very convenient to use such a tool outdoors, which cannot be said about a narrow workshop.

Makita CC301DWAE

The best battery model is Makita CC301DWAE. The weight is even less than the previous one (1.8 kg). The storage capacity is 2Ah (at a voltage of 10.8 V). The kit includes: a cutting disc, a container for a cooler, an additional battery and a charger. The device has more modest performance than other options: 1600 revolutions and a slot depth of 25 mm. The tool does not have its own machine or its own water supply pump. The strengths of the device are lightness, fast cutting and smooth control.

ELITECH PE 450

Mobile network cutter with its own table – ELITECH PE 450. Made as a small box with dimensions 310x360-440 mm. Rubber elements throughout the tile cutter and durable legs add stability.Weight 3.9 kg, disc diameter 115 mm. RPM speed no more than 2950 per minute. The device is an amateur version - you won’t be able to drive it for a long time. It is noted for its low price, ease of setup and management. Disadvantages include no splash protection and low accuracy compared to competing models.