How to use a miter saw
A miter saw can be used both at home and in the workshop. It has a wide range of functions. To choose the right model, you need to understand the features of its use.
The content of the article
What is a miter saw for?
This type of saw allows you to get smooth and precise cuts on the surface. You don’t have to observe the 90-degree angle, but act arbitrarily. Trimming The model is often used for finishing. Many people use it when working with door frames.
Most often it is used when cutting wood or metal. The tool allows you to correct crooked joints on platbands or baseboards.
A saw can help with laying parquet and installing doors. It also copes with expensive and durable materials by sawing them crosswise.
How to use a miter saw
Once a saw is selected, it needs to be configured. Then it will be ready for use. You must act according to the rules. And you need to figure out how to control the tool depending on the material being processed.
On wood
A trigger switch is used to start. But the tool will not start making cuts until the locking lever is pressed. After this, the equipment is lowered towards the material. Before work, it is recommended to put on protective equipment to protect yourself from chips that will appear when processing wood.
The wooden workpiece should be held with your hand if cutting occurs at a right angle. But if the work is being done by a beginner, it is recommended to use a clamp. It holds the material still, allowing you to concentrate on cutting. A clamp is definitely needed if you work with workpieces not at a right angle, but at any other.
To adjust the cutting angle, it is necessary to rotate the platform. You need to unscrew the handle, which acts as a rotary lock, and press it down. The platform is ready to move.
Attention! When changing the angle, the cutting area increases. This reduces the ease of use of the saw, so it is necessary to use clamps.
To change the angle of the wood cut, you can use the vertical tilt of the trimmer. The fixation handle is first loosened, the desired slope is set and secured again.
For metal
Before turning on the tool, you must make sure that its components are reliable and that the disk can move freely. To make a miter cut, you need to loosen the fastening screw at the turntable and start turning it to the desired angle. The set position is immediately fixed. If the work is long, you should periodically check how accurate the trim is. This is due to the fact that after some time the mounting screw loosens.
If you want to cut with a left-hand bevel, it must be set correctly. The fixing screw for fastening the inclined angle is loosened and the desired angle is set. To fix the set parameter, the screw is tightened tightly. After this, cutting continues.
Important! When the work is completed, after turning off the tool, you must wait until the cutting blade comes to a complete stop. After this, the handle returns to the up position.
It is prohibited to remove the protective casing from the device. It rises when the blade is lowered down to cut.
Safety precautions when cutting with a miter saw
When working with the tool, you must follow safety precautions. Before you start cutting, you should check the functionality of each piece of equipment. The fixing parts, casing, various protection systems, etc. must be in good working order.
There should be no foreign objects or workpieces near the workplace. When turning on the tool, you should hold the handle firmly. The surface to be cut must be adhered to with a clamp and be tightly fixed. The supports are selected taking into account the material they are working with. You cannot cut metal workpieces at the same time.
After switching on, the tool should be left idle for a few minutes. This will ensure that the unit is in good working order. The user should take the most comfortable position. For safety, it is also recommended to use special means to protect your hands and face.
