Which saw is better: gasoline or electric?

In recent years, the electric saw has become widespread. In private areas and in the garden, it has a number of advantages, while being inexpensive and compact to store. However, in certain conditions, a gasoline saw will be preferable. Note that each of them has its own advantages depending on the conditions operation.

Which chainsaw is better: electric or gasoline?

The design of the device is almost always the same. The working body is called a chain, which consists of segments connected by a hinge into a closed ring. They are crowned with a sharp thorn, with the help of which cutting occurs.

The assembled mechanism is called a saw set.

An elongated bar with a groove provides pressure and directs the movement of the chain, aligning it and passing it through the hole. The difference in devices is only in the type of motor.

Main difference

An electric saw is powered by an electric motor. It starts from the mains or from a charging battery, depending on the device model. Lightweight, easy to use and compact tool that is used in small processing areas.

Gasoline saws contain an internal combustion engine. It starts by filling it with fuel and a small amount of oil. Check the brand and charge volume in the product data sheet.The manufacturer clearly describes in the instructions how to fill the device.

Comparison of chainsaws and electric saws

When choosing a tool for working on your own site, you need to consider many factors:

1. Scope of application. To solve the problem of cutting down trees and shrubs near a private house, you do not need much performance from the device and autonomy. Typically, the device is easy to plug into an outlet in your home. Another thing is logging and construction work: good device power is required, which is found only in chainsaws.
2. Terms of Use. An electric saw is considered a lightweight and convenient unit, but its effectiveness decreases if the weather is cloudy outside or the morning dew has not yet cleared - this can easily damage the tool. There are no such problems with chainsaws.
3. Mobility. The electric saw “ties” the operator to the outlet. It cannot move further if the length of the wire does not allow movement along the site. Gasoline ones can be transported over long distances and operate autonomously.
4. Reliability. Today, both options are high-quality designs that last at least three years with active use.
5. Performance. Electric models are aimed at “home” use. Cutting branches of a bush or fruit tree, as well as cutting firewood into small pieces - she can handle this. For long-term use and cutting down a large number of trees, only a chainsaw is suitable. Their power and performance are much higher.
6. Price. Household electric models are relatively inexpensive and available to everyone. The cost of gasoline devices is much higher, but it fully justifies their technical characteristics.
7. Economical. From this point of view, electric saws are more convenient.Electricity is cheaper than gasoline and motor oil. In addition, maintenance and repair of fuel saws is more expensive.

Before purchasing, evaluate the amount of work that will be required for the purchased device. You should not chase advertising units, the advantages of which are described by marketers. It is important to purchase an inexpensive unit that meets the conditions of use.