Which is better - a chainsaw or an electric saw?

Owners of summer cottages are often faced with the need to choose the right tool for various types of work. Due to the wide range, you can easily get confused. First, you need to figure out whether to buy a chainsaw or an electric saw. After this, it will be easier to decide on a specific model.

Features of the device of gasoline and electric saws

Tools vary in design and functional parameters. It is necessary to understand the main differences between the two devices.

Chainsaw design

One of the key elements of this equipment is the high-speed engine. Its fuel is gasoline mixed with special oil. Fill the tank with the resulting mixture and get to work.

It is prohibited to use gasoline in its pure form. This provokes equipment failure immediately after switching on.

Also, in addition to the engine, the required elements include a brake, an oil pump that allows you to lubricate the chains, a tire, and a clutch. The model is launched manually. Different circuits can be used, depending on the type of equipment and the task assigned to it.

Electric saw design

The saw set in this model is similar in design to a chainsaw. But most electric saws do not have a clutch.It has been replaced with a button for smooth start. The engine is less powerful than that of the opponent. This is explained by the fact that an increase in productivity makes the tool heavier and increases energy consumption. Due to such nuances, the equipment is less economical and convenient to use.

The design is equipped with a protective arc, which makes the equipment safer. There is also an oil pump. The intensity of its work depends on the speed of the chain. It is necessary to fill the oil on time. Otherwise, faster wear of parts occurs.

Differences in basic parameters and price

The operating principle and cutting elements of both devices are similar. The difference lies in the drive. The power tool is driven by an electric motor. Needs access to the network. To function, a chainsaw requires fuel, which includes gasoline.

The described differences affected the properties of both devices. The power characteristics of the models also differ. It was noted that electric saws have less power. The difference is in the number of revolutions. For an electric saw, the rate per minute is a maximum of 3000, and for chainsaws – up to 15,000. But the electric motor has a higher gear ratio. In an electric model, the chain rotates approximately 30% slower.

The difference is that one type has a clutch, while the other does not. This part allows the chain not to rotate when the model is idling. Electric saws do not have such a function. Their chain starts moving immediately when turned on.

The tires are also not attached in the same way. Electric models use keyless chain tensioning systems. Chainsaws are fastened using nuts that are tightened with a wrench. This is a more reliable and proven method.The tightening force can be controlled visually.

The center of gravity is worth mentioning separately. Gasoline units are made in a balanced manner. This makes them easy to grip and work with. Holding electric models in your hands requires more strength. The situation is complicated by the cable connected to the network. It can either lie on the ground or hang and pull the back of the equipment down.

It is necessary to choose the appropriate option based on the characteristics. Cost does not always play a major role. But if you compare the price of both types, then electric saws are cheaper.

Differences in operation of electric and chainsaws

Electric models do not require serious preparation for work. Install the saw element, add oil and connect to the network. Many models have quick-release parts, thanks to which the chain can be tightened or changed in just a couple of minutes.

Chainsaws are more difficult to prepare. Some models have clamps on the nuts that cannot be disassembled without a key. The chain is tightened manually using a screwdriver. The nuts will hold the elements stronger, but this procedure takes longer.

Also, before use for a gasoline unit, you need to prepare the fuel. To do this, gasoline is mixed with oil and then loaded into the tank. The mixture can be done in the morning. But it’s not worth preparing fuel for several days in advance. When stored for a long time, it loses its properties.

It was noted that thanks to a more balanced design, the chainsaw is more comfortable to hold in your hands. Therefore, you can work with it longer. Electric models often have cables that get in the way, making them difficult to use. This also makes them less safe. You cannot operate such equipment in the rain.

Otherwise, the security level of the devices is the same.If operating instructions are not followed, serious injury can occur when using both types.

What is better to choose for specific conditions - an electric saw or a gasoline model?

To decide on an option, it is necessary to take into account the nature of the work. Power saws It is worth choosing if you are going to use the tool in enclosed spaces. The gasoline version cannot replace it in such conditions. It is perfect for carpentry and carpentry work.

A chainsaw is noisier, so the electric model is suitable for cases where a certain level of silence is required.

If you plan to work with trees or hedges, it is recommended to choose a chainsaw. It can be used in any weather, it is mobile and lightweight.

Saws powered by electricity create less noise. They are more environmentally friendly and suitable for indoor use. But they are less maneuverable due to the wire, require a power supply and cannot be used in bad weather.

Fuel-powered saws are maneuverable, more comfortable to hold, they cope with complex tasks and are more mobile. But they create a lot of noise and are not very environmentally friendly. It is recommended to choose the final option based on the type of work that needs to be performed.