Why does a chainsaw chain dull quickly?

Many owners of suburban areas, among other tools, have chainsaw. It allows you to cope with various tasks quickly and efficiently. It must be used correctly, in compliance with safety precautions. If the efficiency of the equipment has decreased, the problem may be a dull chain. Let's figure out why this happens and how to fix it.

Reasons why a chainsaw chain becomes dull

There are several factors that can affect the sharpness of the teeth. The part cannot remain unblunted for a long time. With regular, intensive use of the tool, the teeth will naturally become less sharp.

The reasons may also be the following:

1. Priming. Accidental contact of soil with equipment will result in poor performance. The quality will noticeably decrease.
2. The chain tension has not been adjusted correctly.
3. Using low quality oil that does not provide proper lubrication. It is not recommended to use mining for these purposes.
4. Type of material being processed. The sharpness of the element is directly affected by the type of wood used. The harder it is, the closer the time when sharpening will be required.
5. Getting under the cutting parts of foreign elements, including plastic, metal objects, glass, stone, etc.
6. It was noted that regular and intensive use increases the need for sharpening.But it is worth noting that working the tool without a break is also not good for it. Every 2 hours it is necessary to stop the equipment for at least 20 minutes.

It is recommended to lubricate the chain with oil before starting work. This will help keep it sharp longer.

When you notice the first signs that the part has become dull, you must immediately begin sharpening. Otherwise, the situation will only get worse.

How to tell if your chain teeth are dull

It is possible to determine that the teeth have lost their former sharpness even at the initial stage of the problem. It is enough to pay attention to several important factors. Among them:

1. Increased physical activity when performing standard work.
2. Sagging, stretching of the chain.
3. When cutting, a strong vibration is felt, the tool begins to slow down.
4. The sawdust changed its appearance after cutting, became small, and the work was no longer accurate. Irregularities appeared, the edges became too sharp.

Experts say that well-sharpened teeth on time are much more important than the power of the tool. Without this, a model of any performance will not perform well.

Why you can’t saw if your teeth are dull

Some people ignore dull teeth and continue to work with such a tool. This error may lead to additional problems. A chainsaw without sharp teeth should not be used for the following reasons:

1. Increased user load. Due to increased vibration, the body has to strain more.
2. The load becomes cyclical.
3. The blanks are not of such quality.
4. Productivity and efficiency are reduced.
5. More fuel is required, as is oil.
6. The load on the remaining parts of the chainsaw increases, they wear out faster.

If you ignore the need for sharpening, then more serious repairs to the tool may be required in the future. Efficiency, as a rule, is reduced by three times. Using blunt equipment also increases the risk of injury. It is necessary to correct this when the first signs of a decrease in the sharpness of the chain are detected. You can do this yourself or contact a specialist.