How to put an attachment on a chainsaw under a grinder

The nozzle allows you to save money. Manufacturers produce many different models of garden tools. In order not to purchase each type separately, you can choose a special attachment. It helps equipment become multifunctional without spending large sums. The main thing is to install it correctly on the device.

Installation Features

It is recommended to study the rules before installation. Among them:

1. First of all, you need to make sure that the chainsaw is clean.
2. Then, remove the side cover, chain and bar.
3. The equipment is purged using compressed air.
4. The candle is unscrewed. For this, a rope with knots is used. Afterwards the piston stroke stops. Then the clutch is unscrewed, and then there is calm.
5. The assembly of the device is carried out in the reverse order. When replacing the side cover, it is recommended to tighten it tightly with several screws.

The hole in the nozzle and the screw rod for adjustment must match. Otherwise, you won't be able to tighten the belt.

Why a chainsaw is suitable for remodeling

The tool has a number of advantages. Among them:

1. The device is equipped with a motor with a good level of power and performance.
2. The motor is quite compact.
3. The engine is ready for use immediately, there is no need for modification.
4. Suitable for use in any conditions, even at an increased level of complexity.
5. The convenient design allows you to use the equipment in various positions.
6. The special arrangement of the clutch helps protect key elements from damage.
7. The presence of an output shaft allows the use of various attachments and additional devices to expand functions.

When choosing a tool, it is recommended to focus on the following parameters:

• power value;
• simplicity and convenience of design;
• economical price of spare parts.

It is not recommended to use expensive models.

DIY grinder attachment

You can build the nozzle yourself. You will need a kit consisting of the following elements:

• two pulleys;
• belt;
• a shaft equipped with a fastening for disks;
• old tire;
• protective casing.

To build a nozzle, it is enough to focus on special drawings.

Start by carefully studying the instructions. The chainsaw tank must be free of oil and fuel. Remove the clutch drum and tire from the housing. The pulley is being fitted.

The belt mechanism is connected to a central disk intended for sawing. This will allow you to change the speed of the main shaft. The nozzle is fixed with pins. Those used to secure the unit tire are suitable.

Whether the nozzle will connect to the equipment depends on the groove, so this is the element that needs to be checked for reliability.

There is a quick method that does not involve tires or other extension cords. It is enough to attach a special adapter to the clutch, which allows you to attach the cutting disc.

It is recommended to take into account several nuances:

1. The strap should not be placed at the top of the tripod cup, which is related to the clutch.This will lead to poor equipment performance. The belt will begin to fail, so the clutch is replaced with a pulley.
2. The rotation of the chainsaw blade when the engine is turned on indicates that the clutch has failed. It is unsafe to use such a unit; its functionality is reduced.

Safety Features

When working with a chainsaw, you must carefully follow safety rules. Among them:

1. The engine speed should be limited.
2. Only use discs that can withstand high rotation speeds.
3. Any work is carried out using a protective casing.
4. The unit must be equipped with an inertia brake.
5. It is recommended to use chainsaws equipped with a special function that protects against kickback.

An attachment that acts like a grinder is a useful element for a chainsaw. It allows you to increase the functionality of the tool, improve the quality of its work, and take advantage of additional equipment capabilities. You can make it and attach it yourself. You just need to strictly follow the installation instructions.